OMNICheck Plus Software From Codebench Is First FIPS 201-Approved Card Authentication Key System for Mobile Platforms

  • Nov 10, 2010
Codebench, Inc., a provider of TWIC / HSPD-12 / FIPS-201 authentication software, announced recently that its OMNICheck Plus software was approved as a Card Authentication Key System for mobile devices by the GSA FIPS 201 Evaluation Program.

OMNICheck is a mobile validation software application that verifies PIV, TWIC, FRAC, CAC, and DESFire credentials over the reader's contact or contactless interface. By integrating with a physical access control database, the software provides security managers with a low-cost mobile reader that controls access to Controlled, Limited, and Exclusion areas as defined by NIST Special Publication 800-116. Once a card is validated and the cardholder is identified, the software emulates a physical access control card reader, so that the access control system can decide whether to permit access through a gate or door.

The products are available on several mobile biometric terminals, including the Cross Match BE.U Mobile, DAP CE3240B, Edgeline CN3/CN4 PIV, MaxID iDL500, Psion Teklogix (Sagem) MC200, and Motorola MC75 (Sagem).

“This is effectively PKI at the door, but without the cabling." says Bob Fontana, president and chief technology officer at Codebench. "Until the access control industry can produce low-cost, high assurance readers that work reliably and securely, OMNICheck Plus is a tool that managers can use to meet their short-term or temporary validation requirements."

The software is integrated with 18 manufacturers’ physical access control systems and is currently deployed by government and commercial users at approximately 40 locations around the country. It is well-known for its use as the leading mobile TWIC reader solution.

Codebench is a software development firm focused exclusively on physical security applications. A certified Women’s Business Enterprise located in Coconut Creek, Fla., the company serves the government, Fortune 500 and academic markets.

Featured

  • Maximizing Your Security Budget This Year

    Perimeter Security Standards for Multi-Site Businesses

    When you run or own a business that has multiple locations, it is important to set clear perimeter security standards. By doing this, it allows you to assess and mitigate any potential threats or risks at each site or location efficiently and effectively. Read Now

  • New Research Shows a Continuing Increase in Ransomware Victims

    GuidePoint Security recently announced the release of GuidePoint Research and Intelligence Team’s (GRIT) Q1 2024 Ransomware Report. In addition to revealing a nearly 20% year-over-year increase in the number of ransomware victims, the GRIT Q1 2024 Ransomware Report observes major shifts in the behavioral patterns of ransomware groups following law enforcement activity – including the continued targeting of previously “off-limits” organizations and industries, such as emergency hospitals. Read Now

  • OpenAI's GPT-4 Is Capable of Autonomously Exploiting Zero-Day Vulnerabilities

    According to a new study from four computer scientists at the University of Illinois Urbana-Champaign, OpenAI’s paid chatbot, GPT-4, is capable of autonomously exploiting zero-day vulnerabilities without any human assistance. Read Now

  • Getting in Someone’s Face

    There was a time, not so long ago, when the tradeshow industry must have thought COVID-19 might wipe out face-to-face meetings. It sure seemed that way about three years ago. Read Now

    • Industry Events
    • ISC West
Most   Popular

Featured Cybersecurity

Webinars

New Products

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings. 3

  • A8V MIND

    A8V MIND

    Hexagon’s Geosystems presents a portable version of its Accur8vision detection system. A rugged all-in-one solution, the A8V MIND (Mobile Intrusion Detection) is designed to provide flexible protection of critical outdoor infrastructure and objects. Hexagon’s Accur8vision is a volumetric detection system that employs LiDAR technology to safeguard entire areas. Whenever it detects movement in a specified zone, it automatically differentiates a threat from a nonthreat, and immediately notifies security staff if necessary. Person detection is carried out within a radius of 80 meters from this device. Connected remotely via a portable computer device, it enables remote surveillance and does not depend on security staff patrolling the area. 3

  • ResponderLink

    ResponderLink

    Shooter Detection Systems (SDS), an Alarm.com company and a global leader in gunshot detection solutions, has introduced ResponderLink, a groundbreaking new 911 notification service for gunshot events. ResponderLink completes the circle from detection to 911 notification to first responder awareness, giving law enforcement enhanced situational intelligence they urgently need to save lives. Integrating SDS’s proven gunshot detection system with Noonlight’s SendPolice platform, ResponderLink is the first solution to automatically deliver real-time gunshot detection data to 911 call centers and first responders. When shots are detected, the 911 dispatching center, also known as the Public Safety Answering Point or PSAP, is contacted based on the gunfire location, enabling faster initiation of life-saving emergency protocols. 3