Five Tips to Stopping a Fire Before it Starts

Do a Smoke Alarm Audit
Do an audit of your home’s smoke alarms. (If you don’t have UL listed smoke alarms, make a plan to install them on each level of the home, especially near sleeping areas). Check placement: Smoke rises, so smoke alarms should be located on a ceiling or high on a wall. Alarms mounted on the ceiling should be at least four inches away from the nearest wall and those mounted on walls should be four to twelve inches down from the ceiling. Test your alarms and be sure that they can be heard in bedrooms even when the doors are closed. If not, install smoke alarms in the bedrooms. Make sure that your kids know what the alarms sound like. Replace alarms that are older than 10 years and replace any alarm that has been painted over.

Make Extinguishers Handy
Be sure that you have at least one or more UL listed fire extinguishers in your home. An ABC-type extinguisher is a good all-purpose choice for fires in the home. Check the gauge located on the extinguisher to see if it needs to be replaced or recharged. Also be sure that the fire extinguisher is in an easily accessible location. Remember that fire extinguishers are not designed to fight large or spreading fires. Your number one priority is to have an escape plan and to get out safely. If the fire is small and contained and the room is not filled with smoke, get everyone out and call the fire department; then, you may use the fire extinguisher to control the fire.

Talk Prevention with Your Kids
Talk to your kids about how they can prevent fires. Children under age five are especially curious about fire and need to start learning about the tremendous danger. Take the mystery out of fire and make sure that your kids know the following safety tips:

  • Never play with matches, lighters or candles.
  • Never play with electrical cords and never put anything in a socket.
  • Blankets or clothes should never be thrown on top of lamps.
  • Don’t turn up a heater without a grown-up’s permission.
  • If your clothes catch on fire, stop, drop and roll.

Look at Your Home From Your Child’s Perspective
Think about how your child sees potential fire hazards in your home by getting down on your hands and knees with them and taking a look around. See any dangling cords that could cause a problem if pulled? Enticing heaters or other appliances? Make adjustments to your home according to what you find.

Avoid Overloading Sockets and Cords
Do a walk-through of your home. If you see sockets with too many cords plugged in or even too many extension cords around the house, it may be time to have extra outlets installed by a professional. Always pay attention to the acceptable wattage for cords and lamps. Also look for extension cords that are “tacked up” or run under a rug as these could be a real fire hazard for kids and adults.

Featured

  • Maximizing Your Security Budget This Year

    Perimeter Security Standards for Multi-Site Businesses

    When you run or own a business that has multiple locations, it is important to set clear perimeter security standards. By doing this, it allows you to assess and mitigate any potential threats or risks at each site or location efficiently and effectively. Read Now

  • New Research Shows a Continuing Increase in Ransomware Victims

    GuidePoint Security recently announced the release of GuidePoint Research and Intelligence Team’s (GRIT) Q1 2024 Ransomware Report. In addition to revealing a nearly 20% year-over-year increase in the number of ransomware victims, the GRIT Q1 2024 Ransomware Report observes major shifts in the behavioral patterns of ransomware groups following law enforcement activity – including the continued targeting of previously “off-limits” organizations and industries, such as emergency hospitals. Read Now

  • OpenAI's GPT-4 Is Capable of Autonomously Exploiting Zero-Day Vulnerabilities

    According to a new study from four computer scientists at the University of Illinois Urbana-Champaign, OpenAI’s paid chatbot, GPT-4, is capable of autonomously exploiting zero-day vulnerabilities without any human assistance. Read Now

  • Getting in Someone’s Face

    There was a time, not so long ago, when the tradeshow industry must have thought COVID-19 might wipe out face-to-face meetings. It sure seemed that way about three years ago. Read Now

    • Industry Events
    • ISC West

Featured Cybersecurity

Webinars

New Products

  • ComNet CNGE6FX2TX4PoE

    The ComNet cost-efficient CNGE6FX2TX4PoE is a six-port switch that offers four Gbps TX ports that support the IEEE802.3at standard and provide up to 30 watts of PoE to PDs. It also has a dedicated FX/TX combination port as well as a single FX SFP to act as an additional port or an uplink port, giving the user additional options in managing network traffic. The CNGE6FX2TX4PoE is designed for use in unconditioned environments and typically used in perimeter surveillance. 3

  • ResponderLink

    ResponderLink

    Shooter Detection Systems (SDS), an Alarm.com company and a global leader in gunshot detection solutions, has introduced ResponderLink, a groundbreaking new 911 notification service for gunshot events. ResponderLink completes the circle from detection to 911 notification to first responder awareness, giving law enforcement enhanced situational intelligence they urgently need to save lives. Integrating SDS’s proven gunshot detection system with Noonlight’s SendPolice platform, ResponderLink is the first solution to automatically deliver real-time gunshot detection data to 911 call centers and first responders. When shots are detected, the 911 dispatching center, also known as the Public Safety Answering Point or PSAP, is contacted based on the gunfire location, enabling faster initiation of life-saving emergency protocols. 3

  • Luma x20

    Luma x20

    Snap One has announced its popular Luma x20 family of surveillance products now offers even greater security and privacy for home and business owners across the globe by giving them full control over integrators’ system access to view live and recorded video. According to Snap One Product Manager Derek Webb, the new “customer handoff” feature provides enhanced user control after initial installation, allowing the owners to have total privacy while also making it easy to reinstate integrator access when maintenance or assistance is required. This new feature is now available to all Luma x20 users globally. “The Luma x20 family of surveillance solutions provides excellent image and audio capture, and with the new customer handoff feature, it now offers absolute privacy for camera feeds and recordings,” Webb said. “With notifications and integrator access controlled through the powerful OvrC remote system management platform, it’s easy for integrators to give their clients full control of their footage and then to get temporary access from the client for any troubleshooting needs.” 3