12 Months Remaining Until Full REAL ID Enforcement Deadline

12 Months Remaining Until Full REAL ID Enforcement Deadline

DHS enforcing critical identification requirements to protect the homeland

The Department of Homeland Security (DHS) is reminding Americans that only 12 months remain until the Oct. 1, 2021, REAL ID enforcement goes into effect. On Oct. 1, 2021, persons seeking to enter federal facilities, nuclear power plants or commercial airplanes at federally regulated airports will be required to have a REAL ID compliant license or acceptable alternative identification, such as a U.S. passport or passport card, to gain entry. DHS continues to urge Americans to obtain a REAL ID-compliant card or acceptable alternative well before this deadline.

All 50 states, the District of Columbia, Puerto Rico, the U.S Virgin Islands and Guam are fully compliant and are issuing these cards. To date, the states and territories have issued approximately 110 million REAL ID-compliant driver’s licenses and identification cards, representing 40 percent of all driver licenses and identification card holders.

Having improved credentials is critical to the security of our homeland as evidenced by the bipartisan 9/11 Commission, which discovered that terrorists easily procured driver licenses. The 19 terrorists who attacked our country on 9/11 acquired more than 30 driver licenses and identification cards, which helped the terrorists conduct critical aspects of their plot, such as renting cars and boarding flights.

Passed by Congress in 2005 following a 9/11 Commission recommendation, the REAL ID Act and regulations establish minimum security standards for state-issued driver’s licenses and identification cards and prohibits federal agencies, like the Transportation Security Administration, from accepting licenses and identification cards for official purposes from states that do not meet these anti-counterfeiting and anti-fraud standards after specific deadlines.

To avoid confusion regarding the REAL ID Act requirements and enforcement milestones, residents can use the following guidelines to be fully informed and prepared.

Check your state-issued driver license or identification card for the star. REAL ID-compliant cards have a star marking in the upper left- or right-hand corner. Most acceptable alternatives, such as state-issued Enhanced Driver Licenses (EDLs), which are available in five states and can be used for entering the United States at land and sea border crossings, do not have the star, but are acceptable for official REAL ID purposes. For more information on EDLs, please go to www.dhs.gov/enhanced-drivers-licenses-what-are-they.

Bring identity documents to the airport that are acceptable for flying domestically. Check to see if you have the proper identification to fly at tsa.gov/travel/security-screening/identification. TSA’s website has a list of acceptable forms of identification that individuals may use to verify their identity at the screening checkpoint. If you need to obtain a new form of ID, please allow sufficient processing time before you travel. For example, the current processing times for U.S. passports are approximately 10 weeks for routine service and two to three weeks for expedited service.

Check in advance with the federal agency you plan to visit to find out whether identification is required, and if so, what types of identity documents are acceptable. While most federal agencies will continue to accept non-compliant driver’s licenses and identification cards until the enforcement deadline of Oct. 1, 2021, some – like Department of Defense facilities and posts – may no longer accept them.

Read answers to REAL ID frequently asked questions at www.dhs.gov/real-id-public-faqs.

Featured

  • Maximizing Your Security Budget This Year

    Perimeter Security Standards for Multi-Site Businesses

    When you run or own a business that has multiple locations, it is important to set clear perimeter security standards. By doing this, it allows you to assess and mitigate any potential threats or risks at each site or location efficiently and effectively. Read Now

  • ISC West 2024 is a Rousing Success

    The 2024 ISC West security tradeshow marked a pivotal moment in the industry, showcasing cutting-edge technology and innovative solutions to address evolving security challenges. Exhibitors left the event with a profound sense of satisfaction, as they witnessed a high level of engagement from attendees and forged valuable connections with potential clients and partners. Read Now

    • Industry Events
    • ISC West
  • Live From ISC West: Day 2

    What a great show ISC West 2024 has been so far. The second day on Thursday was as busy or even more hectic than the first. Remember to keep tabs on our Live From ISC West page for news and updates from the show floor at the Sands Expo, because there’s more news coming out than anyone could be expected to keep track of. Read Now

    • Industry Events
    • ISC West
  • A Unique Perspective on ISC West 2024

    Navigating a tradeshow post-knee surgery can be quite the endeavor, but utilizing an electric scooter adds an interesting twist to the experience. While it may initially feel like a limitation, it actually provides a unique perspective on traversing through the bustling crowds and expansive exhibition halls. Read Now

    • Industry Events
    • ISC West

Featured Cybersecurity

New Products

  • Unified VMS

    AxxonSoft introduces version 2.0 of the Axxon One VMS. The new release features integrations with various physical security systems, making Axxon One a unified VMS. Other enhancements include new AI video analytics and intelligent search functions, hardened cybersecurity, usability and performance improvements, and expanded cloud capabilities 3

  • EasyGate SPT and SPD

    EasyGate SPT SPD

    Security solutions do not have to be ordinary, let alone unattractive. Having renewed their best-selling speed gates, Cominfo has once again demonstrated their Art of Security philosophy in practice — and confirmed their position as an industry-leading manufacturers of premium speed gates and turnstiles. 3

  • HD2055 Modular Barricade

    Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation. 3