The New Safety U

Loyola University Chicago recently became the first university to launch an electronic pre-plan program for fire emergencies

Through the eyes of a safety professional, the bucolic scene on a college campus is a complex set of issues that need to be addressed in an emergency. The meandering paths through school grounds mean it’s that much harder to direct emergency personnel to a building that only has pedestrian access. The many buildings run the gamut from dormitories and offices to lecture halls and potentially hazardous chemistry labs. Each of the thousands of students needs to be notified and directed to safety in case of an emergency, while first responders require pertinent information to respond to the incident.

That’s why Loyola University Chicago started to look into employing an electronic pre-plan for its entire campus.

Loyola University Chicago is the nation’s largest Jesuit Catholic university. Founded in 1870, this urban university has two main campuses: the Lake Shore Campus near Lake Michigan on Chicago’s north side and the Water Tower Campus, located in the heart of downtown Chicago.

The National Fire Protection Association reports that 3,300 structure fires occur annually in dormitories, fraternities and sororities, causing more than $25 million in damage and numerous deaths. With more than 70 buildings and 15,000 students, Father Michael Garanzini, Loyola’s president, knew pre-planning for a fire emergency was crucial.

“Most universities have crisis plans and procedures, like notifying students via Web and text during emergencies,” Garanzini said. “But with our large and spread-out campus, I wanted to be more proactive so that emergencies didn’t turn into major disasters.”

Garanzini found a solution with a Web-based, electronic pre-plan system for fire emergencies used by fire departments and building managers all over the United States. Once a building is spatially mapped, first responders have immediate access to building location, maps, photographs, floor plans, utility shutoff locations, fire hydrant locations, structural information, number of occupants, lists of disabled persons, cautionary notes about possible hazards and other information required to respond to the incident.

With its numerous buildings spread over two campuses, these features were critical for Loyola. Like most campuses, many of the academic and dormitory buildings had a street address that did not actually have street access, which meant an en-route fire truck would reach a dead end, and would need to backtrack and find another access point, losing critical minutes. Numerous buildings contained hazardous materials, ranging from chemistry lab materials to solutions for cooling towers. These issues had the potential to become catastrophes if emergency personnel weren’t prepared.

Gathering Data
The first step in moving Loyola’s data into the system was gathering all of the information, which turned out to be an invaluable process. Like most campuses with multiple buildings, Loyola’s information was spread across structures and departments without a centralized clearinghouse. Security had its own information, and so did operations and even the academic department heads.

Two departments -- security and operations -- headed the data-gathering project. Starting with a basic list of every building on campus, the team took a tour of each one, using mobile computers to input building details and supplementing that information with existing data and documents. For most of the buildings, Loyola’s architectural firm was able to provide electronic floor plans that were easily incorporated into the building’s record. For a handful of older buildings, floor plans were scanned and entered into the system in the same way an attachment is added to an e-mail.

The team also entered material safety data sheets into the system so first responders would be aware of any hazardous material that could be a risk factor in an emergency. This applied not only to materials needed to maintain buildings’ elevators and cooling towers, but also to chemicals in the laboratories.

Through the investigation and walk-through of each building, Loyola staffers discovered information that had not been updated for years. They also realized certain staff members knew information others did not; as a result, finding the person who knew the answers was sometimes a challenge.

Many campus buildings had both a street address and a building name. If a student calls 911 and says,

“I’m in Flanner Hall,” the software is able to easily translate that information for first responders into a map and street address of the location.

Once all of the data had been entered, the system was ready to go. Although fire departments typically keep paper pre-plans of buildings in binders, they are often outdated and incomplete and can take more than an hour to access during an emergency.

Now, updated electronic information is available on computers in Loyola’s security offices and on touchscreen monitors throughout the campus. In addition, because designated personnel can make real-time updates to the system, the emergency pre-plans should always be current.

Pre-Plan Pioneer
Loyola staffers also met with local police and fire departments to brief them on the system. Because the pre-plan system is Web-based, many first responders are able to access the data on mobile computers on the way to an emergency.

Since the electronic pre-plan system at Loyola has been implemented, thankfully, there have been no crises.

However, the staff members at Loyola are confident that, if the need arises, they’ll have access to the information they need to keep their students safe and to be immediately attentive to the specifics of the situation.

Loyola University was the first major university in the United States to adopt an electronic pre-plan system.

Although others have crisis plans in place, none are Web-based or instantly accessible by multiple staff members and emergency personnel. Given the unique challenges of maintaining a safe college campus, it is imperative that more college campuses consider implementing electronic fire emergency pre-plans.

This article originally appeared in the issue of .

About the Author

David Howorka is executive vice president of RealView LLC.

Featured

Featured Cybersecurity

Webinars

New Products

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings. 3

  • A8V MIND

    A8V MIND

    Hexagon’s Geosystems presents a portable version of its Accur8vision detection system. A rugged all-in-one solution, the A8V MIND (Mobile Intrusion Detection) is designed to provide flexible protection of critical outdoor infrastructure and objects. Hexagon’s Accur8vision is a volumetric detection system that employs LiDAR technology to safeguard entire areas. Whenever it detects movement in a specified zone, it automatically differentiates a threat from a nonthreat, and immediately notifies security staff if necessary. Person detection is carried out within a radius of 80 meters from this device. Connected remotely via a portable computer device, it enables remote surveillance and does not depend on security staff patrolling the area. 3

  • Compact IP Video Intercom

    Viking’s X-205 Series of intercoms provide HD IP video and two-way voice communication - all wrapped up in an attractive compact chassis. 3