Hawaii

Hawaii's False Alarm Leads to Changes in Emergency Communication Systems

On Saturday, people in Hawaii received an emergency notification warning of an imminent nuclear missile attack.

For nearly an entire hour on Saturday, the people of Hawaii prepared for the worst. Parents called their children, students ran for the nearest underground shelter and families hid in their bathtubs and basements after receiving an emergency notification from the Hawaii Emergency Management Agency (HEMA) that a "ballistic missile threat" was inbound to the state.

Thirty-eight minutes later, they received another notification. This time, the message informed Hawaiians that the missile threat was a "false alarm."

In the hours after the false alarm notification, HEMA explained the whole ordeal was a simple mistake made by an employee during a shift change.

On Sunday, Federal Communications Commissions Chairman Ajit Pai called the false alert, "absolutely unacceptable" and said a full investigation was "well underway."

"Based on the information we have collected so far, it appears that the government of Hawaii did not have reasonable safeguards or process controls in place to prevent the transmission of a false alert," Pai said in a statement. "Federal, state and local officials throughout the country need to work together to identify any vulnerabilities to false alerts and do what's necessary to fix them. We also must ensure that corrections are issued immediately in the event that a false alarm goes out."

Wireless emergency alerts are typically dispatched during emergency situations - to warn the public of dangerous weather, missing children, and security threats - and are a partnership of the FCC, FEMA and the wireless industry. While the FCC establishes rules and regulations surrounding emergency alerting, responsibility for sending those messages typically falls to emergency management officials, according to The Washington Post.

The situation on Saturday was worsened when Hawaii officials realized that there was no system in place at the state emergency agency for correcting the error. The state agency had standing permission through FEMA to use civil warning systems to send out the missile alert, but not to send out a subsequent false alarm notification.

"We had to double back and work with FEMA [to carft and approve the false alarm alert] and that's what took time," HEMA spokesperson Richard Rapoza said.

Rapoza said that has since been fixed with a cancellation option that can be triggered within seconds of the mistake.

"In the past there was no cancellation button," Rapoza said. "There was no false alarm button at all. Now there is a command to issue a message immediately that goes over on the same system saying 'It's a false alarm. Please disregard.' as soon as the mistake is identified."

The HEMA said it has also suspended all internal drills until the investigation is completed. In addition, it has put in place a "two-person activation/verification" rule for tests and actual missile launch notifications.

“Part of the problem was it was too easy — for anyone — to make such a big mistake,” Rapoza said. “We have to make sure that we’re not looking for retribution, but we should be fixing the problems in the system. . . . I know that it’s a very, very difficult situation for him.”

The employee has since been reassigned to a new position at HEMA.

 

About the Author

Sydny Shepard is the Executive Editor of Campus Security & Life Safety.

Featured

  • Maximizing Your Security Budget This Year

    Perimeter Security Standards for Multi-Site Businesses

    When you run or own a business that has multiple locations, it is important to set clear perimeter security standards. By doing this, it allows you to assess and mitigate any potential threats or risks at each site or location efficiently and effectively. Read Now

  • New Research Shows a Continuing Increase in Ransomware Victims

    GuidePoint Security recently announced the release of GuidePoint Research and Intelligence Team’s (GRIT) Q1 2024 Ransomware Report. In addition to revealing a nearly 20% year-over-year increase in the number of ransomware victims, the GRIT Q1 2024 Ransomware Report observes major shifts in the behavioral patterns of ransomware groups following law enforcement activity – including the continued targeting of previously “off-limits” organizations and industries, such as emergency hospitals. Read Now

  • OpenAI's GPT-4 Is Capable of Autonomously Exploiting Zero-Day Vulnerabilities

    According to a new study from four computer scientists at the University of Illinois Urbana-Champaign, OpenAI’s paid chatbot, GPT-4, is capable of autonomously exploiting zero-day vulnerabilities without any human assistance. Read Now

  • Getting in Someone’s Face

    There was a time, not so long ago, when the tradeshow industry must have thought COVID-19 might wipe out face-to-face meetings. It sure seemed that way about three years ago. Read Now

    • Industry Events
    • ISC West

Featured Cybersecurity

Webinars

New Products

  • Hanwha QNO-7012R

    Hanwha QNO-7012R

    The Q Series cameras are equipped with an Open Platform chipset for easy and seamless integration with third-party systems and solutions, and analog video output (CVBS) support for easy camera positioning during installation. A suite of on-board intelligent video analytics covers tampering, directional/virtual line detection, defocus detection, enter/exit, and motion detection. 3

  • EasyGate SPT and SPD

    EasyGate SPT SPD

    Security solutions do not have to be ordinary, let alone unattractive. Having renewed their best-selling speed gates, Cominfo has once again demonstrated their Art of Security philosophy in practice — and confirmed their position as an industry-leading manufacturers of premium speed gates and turnstiles. 3

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings. 3