California Sheriff’s Department Uses Pivot3 Storage Platform To Support In-Car Video Surveillance Infrastructure

Pivot3 Inc. recently announced that the Placer County Sheriff’s department in California is using the Pivot3 storage platform to support its mobile in-car video surveillance infrastructure. The decision to choose the Pivot3 open-system platform was based on three factors: scalability, ease-of-use and total cost of ownership.

Scalability was a key decision criteria for the county since the system is expected to grow over time, and the county wanted investment protection over the life of the system.

“We first looked at EMC solutions that would only allow only so much capacity before you have to remove the entire logic controller and install a new one,” said Kevin Davis, IT analyst for the Placer County Sheriff’s Department. “With Pivot3, the controller, processor and memory are part of each appliance, not the whole array, which makes expansion very straightforward.”

Ease-of-use was an equally important consideration given the limited resources common to many municipal police environments. It was important that the Pivot3 platform benefits, such as increased availability, bandwidth and scalability, did not require dedicated management personnel, specialized training, or expensive warranty and maintenance contracts.

Proving out the premise that users can install and manage large-scale Pivot3 systems without becoming “storage administrators,” Placer County’s own Davis used the intuitive Pivot3 system to quickly create an array of 36 Terabytes of storage with associated storage volumes for the in-car camera video repository.

“Start to finish, I was done in only a few hours,” Davis said. “Setup was easier than I expected, which allowed us to move on to the real work of monitoring the video we capture.”

Total cost of ownership was another deciding factor during a time of tight fiscal constraints, and, again, the Pivot3 platform offered a strong advantage over competitive options. The Pivot3 platform minimized acquisition costs for Placer County, and the longer-term management and maintenance costs were substantially less as well. In fact, the fully installed Pivot3 solution was roughly one third of the total cost of an EMC Clariion CX310 solution after adding up the warranty, installation and training costs.

“Pivot3 was much more cost-effective than anything else we looked at, and we love the scalability of its clustered storage solution,” said Jerry Silva, IT manager, Public Safety and Criminal Justice Services in the IT Division at Placer County. “Its technology combined with the high interoperability of the system with our existing equipment and software made Pivot3 the perfect choice for our increasing storage requirements.”

Featured

  • Maximizing Your Security Budget This Year

    Perimeter Security Standards for Multi-Site Businesses

    When you run or own a business that has multiple locations, it is important to set clear perimeter security standards. By doing this, it allows you to assess and mitigate any potential threats or risks at each site or location efficiently and effectively. Read Now

  • New Research Shows a Continuing Increase in Ransomware Victims

    GuidePoint Security recently announced the release of GuidePoint Research and Intelligence Team’s (GRIT) Q1 2024 Ransomware Report. In addition to revealing a nearly 20% year-over-year increase in the number of ransomware victims, the GRIT Q1 2024 Ransomware Report observes major shifts in the behavioral patterns of ransomware groups following law enforcement activity – including the continued targeting of previously “off-limits” organizations and industries, such as emergency hospitals. Read Now

  • OpenAI's GPT-4 Is Capable of Autonomously Exploiting Zero-Day Vulnerabilities

    According to a new study from four computer scientists at the University of Illinois Urbana-Champaign, OpenAI’s paid chatbot, GPT-4, is capable of autonomously exploiting zero-day vulnerabilities without any human assistance. Read Now

  • Getting in Someone’s Face

    There was a time, not so long ago, when the tradeshow industry must have thought COVID-19 might wipe out face-to-face meetings. It sure seemed that way about three years ago. Read Now

    • Industry Events
    • ISC West

Featured Cybersecurity

Webinars

New Products

  • ComNet CNGE6FX2TX4PoE

    The ComNet cost-efficient CNGE6FX2TX4PoE is a six-port switch that offers four Gbps TX ports that support the IEEE802.3at standard and provide up to 30 watts of PoE to PDs. It also has a dedicated FX/TX combination port as well as a single FX SFP to act as an additional port or an uplink port, giving the user additional options in managing network traffic. The CNGE6FX2TX4PoE is designed for use in unconditioned environments and typically used in perimeter surveillance. 3

  • ResponderLink

    ResponderLink

    Shooter Detection Systems (SDS), an Alarm.com company and a global leader in gunshot detection solutions, has introduced ResponderLink, a groundbreaking new 911 notification service for gunshot events. ResponderLink completes the circle from detection to 911 notification to first responder awareness, giving law enforcement enhanced situational intelligence they urgently need to save lives. Integrating SDS’s proven gunshot detection system with Noonlight’s SendPolice platform, ResponderLink is the first solution to automatically deliver real-time gunshot detection data to 911 call centers and first responders. When shots are detected, the 911 dispatching center, also known as the Public Safety Answering Point or PSAP, is contacted based on the gunfire location, enabling faster initiation of life-saving emergency protocols. 3

  • Luma x20

    Luma x20

    Snap One has announced its popular Luma x20 family of surveillance products now offers even greater security and privacy for home and business owners across the globe by giving them full control over integrators’ system access to view live and recorded video. According to Snap One Product Manager Derek Webb, the new “customer handoff” feature provides enhanced user control after initial installation, allowing the owners to have total privacy while also making it easy to reinstate integrator access when maintenance or assistance is required. This new feature is now available to all Luma x20 users globally. “The Luma x20 family of surveillance solutions provides excellent image and audio capture, and with the new customer handoff feature, it now offers absolute privacy for camera feeds and recordings,” Webb said. “With notifications and integrator access controlled through the powerful OvrC remote system management platform, it’s easy for integrators to give their clients full control of their footage and then to get temporary access from the client for any troubleshooting needs.” 3