TSA Testing New Credential Authentication Technology

TSA Testing New Credential Authentication Technology

This new credential authentication technology may speed up the TSA process and improve airport security.

The Transportation Security Administration (TSA) is testing new technology at Indianapolis International Airport, according to Aaron Batt, Federal Security Director for Indiana. This new credential authentication technology may speed up the TSA process and improve airport security.

Using this new tech, officers will insert a traveler’s government-issued ID into a scanner. The ID will then appear on a monitor with any irregularities highlighted. Given the variety of organization and security features in both domestic and foreign forms of ID, this technology may give TSA greater ability to identify expired or even altered or fraudulent IDs.

"They all have different security capabilities to them and features to them, and for humans, you can know where many of those are, but you'll never be as good as a piece of technology and computer system," Batt said.

The information gathered by the scanner also connects to the flight reservation system, meaning a boarding pass is unnecessary to get through security. “You don’t have to fumble around for your boarding pass if you’re using this. It can speed up the process, 12 seconds or less,” Batt said.

This technology will not eliminate the body scanner or item scanner requirements, and boarding passes will still be required at airline gates. Indianapolis International Airport is one of six airports testing the credential authentication technology. If these tests find the technology successful, the TSA would like to expand it to all airports within the next four years.

About the Author

Jessica Davis is the Associate Content Editor for 1105 Media.

Featured

New Products

  • HD2055 Modular Barricade

    Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation.

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.

  • AC Nio

    AC Nio

    Aiphone, a leading international manufacturer of intercom, access control, and emergency communication products, has introduced the AC Nio, its access control management software, an important addition to its new line of access control solutions.