Connected Doesn’t Mean Protected

Connected Doesn’t Mean Protected

When it comes to device and systems connectivity, surge protection solutions can mitigate risk

Connectivity is more than just a buzzword to those who design and install security, communications, fire alarm and other electronic systems. It is a necessity for today’s commercial and multi-residential facilities that feature sophisticated electronics to control building access, lighting, emergency safety systems and data networks. This evolution of connected devices represents a huge change in the capabilities of our systems, and how this wide range of technologies is supported. The landscape now includes myriad technologies including wireless networking, new and improved smaller sensors of all kinds, an expanding array of software analytics and the Internet of Things (IoT).

Capabilities and Benefits
While we welcome all of these great new capabilities and the benefits they provide, we should also remember that they all rely upon sensitive electronic circuits. Thus, as we increase our dependence on these systems, we also need to implement backups and protection to help ensure that they are working when they are needed most. The trend for increased networking and connectivity must also bring about a trend for increased power and network protection.

Every networked sensor that provides input to a security system requires power and some form of communication – whether wireless or wired. Even wireless networks depend on wired connectivity to function, since network access points always have both power and wired network connections.

Because of the wired connections throughout every security system, each system is vulnerable to the damaging effects of surges and spikes from the supplied electrical power. They are also vulnerable to electrical disturbances transmitted via communications and signaling cables that can carry unwanted voltages directly to sensitive electronic circuits. Systems that have outdoor components, including outdoor cameras, campus-wide systems, and devices connected to outdoor antennas and communication devices, are particularly vulnerable. They are exposed to the elements and can suffer water leaks and wind damage, among other hazards.

While our dependency on these electronic systems has been increasing, there has been a parallel growth in the sources of electrical disturbances that can cause power surges and spikes. Electrical power surges can be considered a “silent killer” of electronic equipment because most surges are small enough to remain undetected by organizational staff. Even though they go unnoticed, they slowly and steadily damage electronic equipment, reducing product lifespan and reliability.

Damaging surge events affecting your business is not a question of “if”, but “when”. Protecting these systems from potential damage must be a high priority for business management to ensure organizational continuity and appropriate risk management.

Surge Protection Solutions
A common misconception about power surges is that electrical and electronic devices are only at risk during thunderstorms. It is certainly true that in addition to causing property loss, lightning can damage robotics, communication lines and computer equipment and result in extended downtime for an organization. However, most experts agree that lightning strikes account for only 2% of all surge-related damage, meaning that 98% percent of the damage usually happens during these “unnoticed” events.

Power surges caused by everyday occurrences from external sources such as powerline switching on the grid; as well as internal sources such as powering up HVAC systems and other pumps and motors that are often present in commercial and industrial facilities. These minor power surges and spikes may not be noticed in real time, but they have long term effects on fire and life safety systems, along with security and data systems. These damaging events can hamper proper operation and/or shorten equipment lifecycles, resulting in early, unexpected failures.

While not every system will fail due to a surge event, the chances are good that any unprotected electronic security system will incur some damage during its lifetime from power surges and spikes. For every essential security and life safety device, including access control, video surveillance and fire alarm systems, and the small additional price for proper surge protection should be no obstacle. The cost of providing surge protection is typically less than the sales tax on the system.

Best practices dictate that every sensitive electronic device should have surge protection at its supplied power connection, in addition to the surge protection that is installed at the facility power entry point. Damaging power surges can also be created inside the facility perimeter from inductive load switching as well as through the building’s power connections. Since the network cabling provides a conductive path for electrical power surges, it is a wise move to protect sensitive electronic systems by installing surge protection at both ends of all connected network equipment.

This is vital for cabling paths that run to exterior areas including outdoor facilities for surveillance cameras, access control readers, gate control panels, electronic locks, or any other networked electronics or sensors.

Even in areas with little or no lightning activity, exterior electronic equipment is vulnerable to the effects of static electricity. Any device that is powered has the potential to create an electrical fault or short circuit that can transmit damaging power surges through the network cabling to reach other sensitive networked equipment.

Applicable solutions for these challenges include rack and wall mount surge protectors for interior network rooms, as well as single channel protectors for use at the remote networked equipment. There are even special models available that are built for connections exposed to extreme weather conditions. Surge protectors for networked cabling are designed to minimize signal losses while passing high-speed digital network traffic.

Making the Case
As the security industry moves forward to implement increasingly capable and intelligent risk-reduction systems – along with more networked and interconnected devices – we must all take steps to protect these systems from unintended but foreseeable damage. Surge protection solutions can protect every critical electronic system from power events, improving their reliability and extending their useful lives. With a simple installation process, and very modest cost, implementing surge protection with new systems and adding them to existing unprotected systems should be an easy decision.

Featured

  • New Report Reveals Top Trends Transforming Access Controller Technology

    Mercury Security, a provider in access control hardware and open platform solutions, has published its Trends in Access Controllers Report, based on a survey of over 450 security professionals across North America and Europe. The findings highlight the controller’s vital role in a physical access control system (PACS), where the device not only enforces access policies but also connects with readers to verify user credentials—ranging from ID badges to biometrics and mobile identities. With 72% of respondents identifying the controller as a critical or important factor in PACS design, the report underscores how the choice of controller platform has become a strategic decision for today’s security leaders. Read Now

  • Overwhelming Majority of CISOs Anticipate Surge in Cyber Attacks Over the Next Three Years

    An overwhelming 98% of chief information security officers (CISOs) expect a surge in cyber attacks over the next three years as organizations face an increasingly complex and artificial intelligence (AI)-driven digital threat landscape. This is according to new research conducted among 300 CISOs, chief information officers (CIOs), and senior IT professionals by CSC1, the leading provider of enterprise-class domain and domain name system (DNS) security. Read Now

  • ASIS International Introduces New ANSI-Approved Investigations Standard

    • Guard Services
  • Cloud Security Alliance Brings AI-Assisted Auditing to Cloud Computing

    The Cloud Security Alliance (CSA), the world’s leading organization dedicated to defining standards, certifications, and best practices to help ensure a secure cloud computing environment, today introduced an innovative addition to its suite of Security, Trust, Assurance and Risk (STAR) Registry assessments with the launch of Valid-AI-ted, an AI-powered, automated validation system. The new tool provides an automated quality check of assurance information of STAR Level 1 self-assessments using state-of-the-art LLM technology. Read Now

  • Report: Nearly 1 in 5 Healthcare Leaders Say Cyberattacks Have Impacted Patient Care

    Omega Systems, a provider of managed IT and security services, today released new research that reveals the growing impact of cybersecurity challenges on leading healthcare organizations and patient safety. According to the 2025 Healthcare IT Landscape Report, 19% of healthcare leaders say a cyberattack has already disrupted patient care, and more than half (52%) believe a fatal cyber-related incident is inevitable within the next five years. Read Now

New Products

  • Connect ONE’s powerful cloud-hosted management platform provides the means to tailor lockdowns and emergency mass notifications throughout a facility – while simultaneously alerting occupants to hazards or next steps, like evacuation.

    Connect ONE®

    Connect ONE’s powerful cloud-hosted management platform provides the means to tailor lockdowns and emergency mass notifications throughout a facility – while simultaneously alerting occupants to hazards or next steps, like evacuation.

  • ResponderLink

    ResponderLink

    Shooter Detection Systems (SDS), an Alarm.com company and a global leader in gunshot detection solutions, has introduced ResponderLink, a groundbreaking new 911 notification service for gunshot events. ResponderLink completes the circle from detection to 911 notification to first responder awareness, giving law enforcement enhanced situational intelligence they urgently need to save lives. Integrating SDS’s proven gunshot detection system with Noonlight’s SendPolice platform, ResponderLink is the first solution to automatically deliver real-time gunshot detection data to 911 call centers and first responders. When shots are detected, the 911 dispatching center, also known as the Public Safety Answering Point or PSAP, is contacted based on the gunfire location, enabling faster initiation of life-saving emergency protocols.

  • EasyGate SPT and SPD

    EasyGate SPT SPD

    Security solutions do not have to be ordinary, let alone unattractive. Having renewed their best-selling speed gates, Cominfo has once again demonstrated their Art of Security philosophy in practice — and confirmed their position as an industry-leading manufacturers of premium speed gates and turnstiles.