Security Engineered Machinery

Low Volume Disintegrators

Low Volume Disintegrators

Security Engineered Machinery has redesigned its low-volume disintegrators for the thorough destruction of sensitive and outdated records. Ideal for office use, the Model 200 and Model DS-200 both destroy paper and many other materials, including CDs and DVDs, key tape (in strips or rolls), floppy disks, audio cassettes, ID badges, credit cards and more. Model DS-200 is a dual-stage unit with a built-in conventional shredder that can accept 14 sheets of paper at a time with no need to remove staples or paperclips. Pre-shredding reduces cycle time, saves energy, and extends the life of the on-board disintegrator.

http://www.semshred.com/model_200_disintegrator


    Featured

    Most   Popular

    New Products

    • HD2055 Modular Barricade

      Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation.

    • Camden CV-7600 High Security Card Readers

      Camden CV-7600 High Security Card Readers

      Camden Door Controls has relaunched its CV-7600 card readers in response to growing market demand for a more secure alternative to standard proximity credentials that can be easily cloned. CV-7600 readers support MIFARE DESFire EV1 & EV2 encryption technology credentials, making them virtually clone-proof and highly secure.

    • Camden CM-221 Series Switches

      Camden CM-221 Series Switches

      Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.