Yale Locks & Hardware

Key Free B1L and T1L

Key Free B1L and T1L

The Key Free B1L and T1L boast the quality cues of Yale’s current lock line, including fully gasketed installation, ANSI/ BHMA grade 2 certification, motorized tapered deadbolts, and intuitive phone layout keypads. For additional homeowner peace of mind, ample warning is provided before the locks’ batteries lose power, and if connected to a home control system the system may generate “low battery” email or text alerts. Should the batteries drain, terminals on the bottom exterior of the lock accept a nine-volt battery, which provides enough power to enter the code and gain access.

https://www.yale2you.com/Products/Keyless/US3KeyFreeTouchscreenDeadboltStandAlone.aspx


    Featured

    New Products

    • Unified VMS

      AxxonSoft introduces version 2.0 of the Axxon One VMS. The new release features integrations with various physical security systems, making Axxon One a unified VMS. Other enhancements include new AI video analytics and intelligent search functions, hardened cybersecurity, usability and performance improvements, and expanded cloud capabilities

    • HD2055 Modular Barricade

      Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation.

    • Camden CM-221 Series Switches

      Camden CM-221 Series Switches

      Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.