Skip to main content

Axis Communications, Inc.

AXIS FA Series

AXIS FA Series

The modular AXIS FA Series consists of separate units that comprise the AXIS FA54 Main Unit, AXIS FA1105 Sensor Unit with a standard lens, AXIS FA1125 Sensor Unit with a pinhole lens and AXIS FA4115 Dome Sensor Unit with a varifocal lens. The Series enables cost-effective and highly discreet indoor surveillance of four closely situated areas using one camera system. AXIS FA54 Main Unit can stream at full frame rate HDTV 1080p videos from four connected sensor units simultaneously using one IP address. It captures video with Wide Dynamic Range- Forensic Capture (WDR) that is optimized for low light and motion. AXIS FA54 also has the capacity to support advanced video analytics, and has an HDMI output for connection to a surveillance monitor, making the system ideal for retail applications. The sensor units are small enough to be built into surfaces, structures or devices, and can be installed discreetly at eye level.

    Featured

    Most   Popular

    New Products

    • AC Nio

      AC Nio

      Aiphone, a leading international manufacturer of intercom, access control, and emergency communication products, has introduced the AC Nio, its access control management software, an important addition to its new line of access control solutions.

    • FEP GameChanger

      FEP GameChanger

      Paige Datacom Solutions Introduces Important and Innovative Cabling Products GameChanger Cable, a proven and patented solution that significantly exceeds the reach of traditional category cable will now have a FEP/FEP construction.

    • Camden CM-221 Series Switches

      Camden CM-221 Series Switches

      Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.