Mauritius Port Uses IndigoVision For Harbor-Wide Surveillance System

Port Louis, the capital and main port of Mauritius, has invested in IndigoVision’s complete integrated IP video solution for a new harbor-wide surveillance system. The flexibility and distributed nature of the system allows a number of different agencies to monitor their own operations within the port. Based in a new central control room and a number of sub-control rooms the Mauritius Police Force, National Coast Guard, Customs and the Mauritius Port Authority (MPA), can access live and recorded video from the many cameras located inside and outside of the port buildings.

A port operation creates a complex security environment, which requires a surveillance system that is both flexible and delivers the very highest-quality video. Following an analysis of competing systems, IndigoVision was chosen because of its compression, video quality and the fact that it was a genuinely distributed system that is fully scalable.

"Brinks has always maintained a key differentiation over other system integrators by exceeding the expectations of its customers," said Vikash Augnu, project manager for Brinks Mauritius, IndigoVision’s local partner that designed and installed the system.
"In doing so, we had to provide the very best CCTV system for the port, which is one of the main trade entry routes into Mauritius and a high profile government installation. The site was very complex, which demanded a solution which was easy to install and deploy. As a key member of the system design and execution team, I was amazed at the flexibility that the IndigoVision system provided, while still being a very robust solution."

With some cameras located over 2.5 miles away and a number being connected via wireless networks the video compression used was very important. IndigoVision’s compression technology allows DVD-quality, 25fps, video to be streamed with minimum bandwidth requirement and latency. This enables PTZ cameras to be controlled smoothly over large distances and wireless networks to be easily deployed.

Each agency’s operators use ‘Control Center’, IndigoVision’s Security Management Software (SMS), to view live and recorded video from any of the cameras. An advanced suite of tools provides fast playback and analysis of recorded video and clips can be exported for evidential purposes following an incident. ‘Control Center’ is licensed on an unrestricted basis within the cost of IndigoVision hardware, which means workstations can be deployed for no more than a cost of a level-entry PC.

This was exploited by the MPA as three workstations, with 21 spot monitors, were installed in the main control room and a further nine workstations deployed in five sub-control rooms. The distributed nature of the system means any component, including ‘Control Center’ workstations, can be located at any point on the network. IndigoVision’s distributed architecture removes the single point of failure associated with analog and centralized network systems, creating a more robust solution -- an important consideration for a high-profile surveillance operation at a major port.

"The system has been a great benefit to the MPA and other agencies," Augnu said. "Petty theft has decreased, they have improved surveillance of the main gates, enhanced control and monitoring at the terminal and quay areas and a much better deterrence particularly in the customs area."

Each camera is continuously recorded at full framerate for 1 month on 8 NVRs, with a total storage of 16 Terabytes. Any ‘Control Center’ workstation with the right permissions, no matter where it is located, can access recorded video from the NVRs. The cameras used were a variety of indoor and outdoor analog models, with each being connected to IndigoVision’s 8000 transmitter/receiver units.

These convert the camera video into a MPEG-4 compressed digital stream for transmission over the fiber LAN or wireless network, both of which were newly installed by Brinks. MPA also use wash/wipe kits on their external cameras, which are triggered directly from any ‘Control Center’ workstation using custom commands sent over the network to the 8000 and then via a RS845 serial interface to the wash/wipe unit.

Featured

New Products

  • ResponderLink

    ResponderLink

    Shooter Detection Systems (SDS), an Alarm.com company and a global leader in gunshot detection solutions, has introduced ResponderLink, a groundbreaking new 911 notification service for gunshot events. ResponderLink completes the circle from detection to 911 notification to first responder awareness, giving law enforcement enhanced situational intelligence they urgently need to save lives. Integrating SDS’s proven gunshot detection system with Noonlight’s SendPolice platform, ResponderLink is the first solution to automatically deliver real-time gunshot detection data to 911 call centers and first responders. When shots are detected, the 911 dispatching center, also known as the Public Safety Answering Point or PSAP, is contacted based on the gunfire location, enabling faster initiation of life-saving emergency protocols.

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.

  • Luma x20

    Luma x20

    Snap One has announced its popular Luma x20 family of surveillance products now offers even greater security and privacy for home and business owners across the globe by giving them full control over integrators’ system access to view live and recorded video. According to Snap One Product Manager Derek Webb, the new “customer handoff” feature provides enhanced user control after initial installation, allowing the owners to have total privacy while also making it easy to reinstate integrator access when maintenance or assistance is required. This new feature is now available to all Luma x20 users globally. “The Luma x20 family of surveillance solutions provides excellent image and audio capture, and with the new customer handoff feature, it now offers absolute privacy for camera feeds and recordings,” Webb said. “With notifications and integrator access controlled through the powerful OvrC remote system management platform, it’s easy for integrators to give their clients full control of their footage and then to get temporary access from the client for any troubleshooting needs.”