National Renewable Energy Laboratory Deploys SightLogix Outdoor Video Surveillance Systems

The U.S. Department of Energy’s National Renewable Energy Laboratory (NREL) has selected SightLogix outdoor video surveillance systems for deployment at the South Table Mountain campus in Golden, Colo. as well as at the National Wind Technology Center near Boulder, Colo.

Video intrusion detection systems incorporating SightLogix Thermal SightSensor cameras and SightTracker PTZ controllers will enhance perimeter security and visual verifications of intrusion for real-time situational awareness at both locations.
 
The SightLogix video analytics system was chosen for its greater security while also lowering project costs. By significantly reducing the number of poles, trenching and communication requirements, long-range Thermal SightSensors proved to be more accurate and less expensive overall, requiring fewer cameras and greatly reduced infrastructure than competing proposals.

NREL is DOE’s primary national laboratory for renewable energy and energy efficiency research and development. The mission of the wind energy research conducted at NREL's National Wind Technology Center (NWTC) is to collaborate with industry to further wind technology and to accelerate its commercialization in the marketplace.

As a solution to protect large facilities, the SightLogix automated outdoor video system accurately detects, provides assessment detail, and locates intrusions over large outdoor areas and perimeters in all weather and geographies.

For the NREL security project, the systems utilize long-range Thermal SightSensors to detect intrusions along the perimeter, and GPS-based SightTracker controllers to automatically steer FLIR dual-head PTZ thermal imaging cameras to track and follow detected targets. The result is complete situational awareness and forensic detail over the entire perimeter.

“We are pleased that SightLogix has been selected to protect important U.S. assets such as these facilities at the Department of Energy,” said John Romanowich, president and CEO of SightLogix. “Our technology has been specifically designed to address outdoor challenges, including those of wind and solar energy generation facilities, which include high winds and wide operating temperature ranges. As a result, the Department of Energy can benefit from our solutions at these and other locations.”
                                        
“Our design team spent a considerable amount of time reviewing the objectives and intentions of the customer specification. We looked at a variety of potential solutions and made the final recommendation to use SightLogix’ based on their product performance, cost and the superior level of customer service we received,” said Zack Carlson, account manager with VTI Security.

Featured

Featured Cybersecurity

Webinars

New Products

  • HD2055 Modular Barricade

    Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation. 3

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings. 3

  • Automatic Systems V07

    Automatic Systems V07

    Automatic Systems, an industry-leading manufacturer of pedestrian and vehicle secure entrance control access systems, is pleased to announce the release of its groundbreaking V07 software. The V07 software update is designed specifically to address cybersecurity concerns and will ensure the integrity and confidentiality of Automatic Systems applications. With the new V07 software, updates will be delivered by means of an encrypted file. 3