Christmas Fire Safety in Emerging Markets

Christmas Fire Safety in Emerging Markets

As Christmas approaches, and textile factories across Asia step up production, let’s hope that fire regulations will be better served by stricter monitoring – and that, inch by inch, the lessons of fire safety become embedded in more jurisdictions worldwide.

Fire safety is a subject that Wrightstyle knows quite a lot about.  Therefore, we’re aware of the huge variation in fire regulations between different jurisdictions, and the patchy way that those regulations are sometimes monitored and enforced.  We’ve sometimes felt compelled to raise some of those concerns – including with the UK government when we felt that some internal fire doors were being wrongly classified as fire-safe.

Perhaps most notably we changed our fire certification methodology in one Middle Eastern country, because some architects were taking project-specific Wrightstyle certificates, copying them, and then applying them on other projects for which the fire test certificate might not be appropriate.

We’ve also written about the appalling textile factory tragedies in Bangladesh and elsewhere.  Our thirst for cheap T-shirts has in too many cases led factory owners and operators to cut corners.  The Tanzeen fashion factory fire in 2012 is an obvious example, killing over 100 workers and injuring 200 more – or, worse, the 2013 collapse of the Rana Plaza factory building with the loss of over 1,000 people.

But, these are just the industrial fires and building tragedies that make the news.  In a report published at the end of 2013 by international labour campaigners, nearly 800 people were injured in garment and textile fires in Bangladesh in the previous 12 months.

But as we approach Christmas, it’s also worth remembering the 21st anniversary of the Kader Industrial Toy Company fire in Thailand.  In that blaze, nearly 200 people lost their lives, and nearly 500 were injured.  There were inadequate fire extinguishers or alarms, fire escapes couldn’t cope and some exits had been locked shut.

Nor was there a sprinkler system and the building was constructed with uninsulated steel which quickly led to building collapse.  Like most catastrophic fires, its likely cause was something minor – most likely a spark from an electrical short-circuit.

Before Kader, the worst factory blaze had been in the USA – in New York’s Shirtwaist plant in 1911, which killed nearly 150 garment workers.

However, despite some similarities between the two fires, there is one glaring difference.  The New York fire directly led to new laws on building access and egress, fireproofing requirements, the availability of fire extinguishers, and automatic sprinklers.  The Thailand fire happened in a jurisdiction where fire regulations had been ignored because official monitoring was inadequate.

It comes down to effective fire and building regulations being robustly applied – everything from building design and construction to tested alarms and suppression systems, such as sprinklers.

But containment is also a key factor – to prevent the fire spreading from its original location.  Those protective barriers, often external curtain walling or internal glass screens, also serve to provide escape routes for the building’s occupants – a safety strategy lacking in many Asian fire tragedies in recent years.

At Wrightstyle, we have invested significantly in research and design in both our internal and external systems – curtain walling, fire screens and fire doors – developing technically-advanced products and systems that have overcome the limitations inherent in the glass itself.

Around the developed world, more stringent building and fire regulations have led to architectural and design teams taking a multi-disciplinary approach to assessing hazards: positively addressing the possible risks against that building’s occupants, structure, resources and continuity of operations.  That assessment then guides the design team in determining acceptable risks and the effectiveness of the safety measures proposed.

In developing countries, the safety dynamic is changing – largely driven by large corporations implementing better supply chain management, and insisting on more stringent safe and ethical working conditions.  The best-known accreditation body is WRAP (Worldwide Responsible Apparel Production).

But the demands of Western retailers and the buying public are largely cost-driven, and squaring the circle of price, worker safety and the wider environment is a constant challenge.

As Christmas approaches, and textile factories across Asia step up production, let’s hope that fire regulations will be better served by stricter monitoring – and that, inch by inch, the lessons of fire safety become embedded in more jurisdictions worldwide.

Featured

  • The Yellow Brick Road

    The road to and throughout Wednesday's and Thursday's ISC West was crowded but it was amazing. Read Now

    • Industry Events
    • ISC West
  • An Inside Look From Napco at ISC West

    Get a look into the excitement at ISC West 2025 from Napco. Hear from some of their top-tech executives live from the show floor. Read Now

    • Industry Events
    • ISC West
  • Upping the Ante

    I am not a betting man in terms of cards, dice, blackjack or that wheel with the black marble racing around the circumference of a spinning wheel, but I would bet on the success of ISC West this year. Read Now

    • Industry Events
    • ISC West
  • It's Show Time

    I am one of those people that likes to see things get bigger and better. As advertised, ISC West is going to be bigger (more exhibitors) and better (more attendees). It’s show time in Las Vegas. Read Now

    • Industry Events
    • ISC West

New Products

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.

  • FEP GameChanger

    FEP GameChanger

    Paige Datacom Solutions Introduces Important and Innovative Cabling Products GameChanger Cable, a proven and patented solution that significantly exceeds the reach of traditional category cable will now have a FEP/FEP construction.

  • PE80 Series

    PE80 Series by SARGENT / ED4000/PED5000 Series by Corbin Russwin

    ASSA ABLOY, a global leader in access solutions, has announced the launch of two next generation exit devices from long-standing leaders in the premium exit device market: the PE80 Series by SARGENT and the PED4000/PED5000 Series by Corbin Russwin. These new exit devices boast industry-first features that are specifically designed to provide enhanced safety, security and convenience, setting new standards for exit solutions. The SARGENT PE80 and Corbin Russwin PED4000/PED5000 Series exit devices are engineered to meet the ever-evolving needs of modern buildings. Featuring the high strength, security and durability that ASSA ABLOY is known for, the new exit devices deliver several innovative, industry-first features in addition to elegant design finishes for every opening.