Drones Halted California Firefighters

Drones Halted California Firefighters' Efforts to Contain Wildfire

As a massive wildfire engulfed Cajon Pass, California yesterday, firefighters were forced to ground their aircraft until five recreational drones stopped flying around in the airspace. Over 20 vehicles were destroyed as the fire quickly crossed Interstate 15. Had it not been for the invasive drones, firefighters might have been able to better contain the out-of-control flames.

Because firefighting aircraft fly so low when performing water drops, drones can wreak havoc for them. As soon as officials see drones, they shut down all aircraft for safety reasons. For example, should a drone get stuck into a wing or propeller, this could result in serious repercussions.

In this situation, ground crews had to stop fighting fires, look for the drone operators and instruct them to stop flying around the fire so that aircraft could continue their attempts at controlling the blaze. This delayed firefighting efforts for 26 minutes, in which battalion chief of the San Bernadino Fire Department verified that this delay “definitely contributed” to the fire hopping the freeway.

mikeledray / Shutterstock.com

About the Author

Ginger Hill is Group Social Media Manager.

Featured

New Products

  • Camden CV-7600 High Security Card Readers

    Camden CV-7600 High Security Card Readers

    Camden Door Controls has relaunched its CV-7600 card readers in response to growing market demand for a more secure alternative to standard proximity credentials that can be easily cloned. CV-7600 readers support MIFARE DESFire EV1 & EV2 encryption technology credentials, making them virtually clone-proof and highly secure.

  • Compact IP Video Intercom

    Viking’s X-205 Series of intercoms provide HD IP video and two-way voice communication - all wrapped up in an attractive compact chassis.

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.