All States Now Compliant Ahead of REAL ID Deadline

DHS Enforcing Critical Identification Requirements to Protect the Homeland

The Department of Homeland Security (DHS) is announcing that after more than 15 years since Congress passed the REAL ID Act, all 50 states are now in full compliance issuing these cards, with most states becoming compliant in the last four years. To date, the 50 states have issued more than 105 million REAL ID-compliant driver’s licenses and identification cards, representing 38 percent of all driver licenses and identification card holders.

On Oct. 1, 2021 – less than 13 months away – full enforcement of REAL ID will take effect at all federally regulated airports, federal facilities, and nuclear power plants.

The department continues to urge Americans to obtain a REAL ID-compliant card or acceptable alternative, such as a U.S. passport or passport card prior to the Oct. 1, 2021 enforcement deadline.

Passed by Congress in 2005 following a 9/11 Commission recommendation, the REAL ID Act establishes minimum security standards for state-issued driver’s licenses and identification cards and prohibits federal agencies, like the Transportation Security Administration, from accepting licenses and identification cards for official purposes from states that do not meet these standards after specific deadlines.

Security standards include incorporating anti-counterfeiting technology, preventing insider fraud, and using documentary evidence and record checks to ensure a person is who he or she claims to be. It also prohibits federal agencies from accepting non-compliant licenses and identification cards for access to federal facilities, nuclear power plants, and commercial aircraft. These standards have significantly improved the reliability and accuracy of state-issued driver’s licenses and identification cards.

Because of the potential for confusion about the REAL ID Act enforcement milestones, residents can use the following guidelines to be fully informed and prepared.

Check your state-issued driver license or identification card for the star. REAL ID-compliant cards generally have a star marking in the upper left- or right-hand corner. Most acceptable alternatives, such as state-issued Enhanced Driver’s Licenses, do not have the star, but are acceptable for official REAL ID Act compliance purposes. For more information on EDLs, go to www.dhs.gov/enhanced-drivers-licenses-what-are-they.

Bring identity documents to the airport that are acceptable for flying domestically. Check to see if you have the proper identification to fly at tsa.gov/travel/security-screening/identification. If you need to obtain a new form of ID, please allow sufficient processing time before you travel. For example, the current processing times for U.S. passports are six to eight weeks for routine service and two to three weeks for expedited service.

Check with the federal agency you plan to visit, in advance, to find out whether identification is required, and if so, what types of identity documents are acceptable. While most federal agencies will continue to accept non-compliant driver’s licenses and identification cards until the enforcement deadline of Oct. 1, 2021, some – like Department of Defense facilities and posts – no longer accept them.

Read answers to REAL ID frequently asked questions at www.dhs.gov/real-id-public-faqs.

DHS continues working closely with all states and territories to implement REAL ID Act requirements. The women and men of DHS will continue to work tirelessly to keep our country and our people safe.

Featured

  • An Inside Look From Napco at ISC West

    Get a look into the excitement at ISC West 2025 from Napco. Hear from some of their top-tech executives live from the show floor. Read Now

    • Industry Events
    • ISC West
  • Upping the Ante

    I am not a betting man in terms of cards, dice, blackjack or that wheel with the black marble racing around the circumference of a spinning wheel, but I would bet on the success of ISC West this year. Read Now

    • Industry Events
    • ISC West
  • It's Show Time

    I am one of those people that likes to see things get bigger and better. As advertised, ISC West is going to be bigger (more exhibitors) and better (more attendees). It’s show time in Las Vegas. Read Now

    • Industry Events
    • ISC West
  • SIA Releases New Report on Operational Security Technology

    The Security Industry Association (SIA) has released an impactful new resource – Operational Security Technology: Principles, Challenges and Achieving Mission-Critical Outcomes Leveraging OST. Read Now

New Products

  • EasyGate SPT and SPD

    EasyGate SPT SPD

    Security solutions do not have to be ordinary, let alone unattractive. Having renewed their best-selling speed gates, Cominfo has once again demonstrated their Art of Security philosophy in practice — and confirmed their position as an industry-leading manufacturers of premium speed gates and turnstiles.

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.

  • HD2055 Modular Barricade

    Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation.