Study: Communities Find Success with Model Alarm Ordinance

Study: Communities Find Success with Model Alarm Ordinance

A new study by a professor at the UNC-Charlotte, Criminal Justice & Criminology Department shows that most electronic security systems in the communities studied protect life and property without generating calls for police services. The study examined four communities that had adopted the Model Alarm Ordinance, developed by the industry and leaders in law enforcement to reduce unnecessary calls for service while maintaining police response to alarms.

The four communities included Charlotte-Mecklenburg, North Carolina; Atlanta and Marietta, Georgia; and Montgomery County, Maryland. These communities represented two large agencies, one smaller suburban agency and one county agency managing more than 570,000 permitted alarm systems.

"A key finding of the study," said Dr. Joe Kuhns, "is that the vast majority of alarm systems in these four locations were effective at protecting lives and property while generating zero calls for service in a given year, and only a tiny percentage are problematic systems that generated multiple calls for service."

The annual average percentage of registered alarms that generated zero dispatches was as high as 92% in Charlotte-Mecklenburg, 82.6% in Atlanta, 87.5% in Montgomery County and 66.4% in Marietta. These statistics represented an 8 or10-year average, depending on how long the ordinance had been in effect.

"It is also noteworthy that the percentage of zero dispatches tends to increase over time," said Kuhns. "As jurisdictions get better at administration, and the public becomes more familiar with the ordinance, results consistently improved over time in these four settings."

The proportion of problematic systems, which generate three or more dispatches in a year, was only .09% in Charlotte-Mecklenburg, 3.5% in Atlanta, 1.08% in Montgomery County and 8.7% in Marietta.

The Model Alarm Ordinance was created in collaboration with leaders in public safety through organizations such as the International Association of Chiefs of Police and the National Sheriffs' Association," said Stan Martin, executive director of the Security Industry Alarm Coalition (SIAC) which funded the study. "Public safety leaders recognize the important role electronic security plays in their communities and the importance of police response as a deterrent to crime.

"The Model Alarm Ordinance directly addresses the issue that the vast majority of false alarms are caused by user error," said Martin. "The study demonstrates that the strategy of focusing on the chronic abusers and fining owners who are careless in operating their electronic security systems is the most effective way of minimizing calls for service.

"The Model Alarm Ordinance is a framework that communities can modify to best fit their local needs," said Martin. "SIAC provides consultation at no cost to law enforcement agencies considering or modifying alarm ordinances."

"The model alarm ordinance calls for increasing fines or even curtailing response to the very small percentage of systems that place inordinate demands on public safety agencies," said Kuhns. "In addition, it mandates multiple contacts with the alarm site prior to contacting public safety agencies."

"False alarms did not consume a lot of law enforcement resources in the four agencies we studied," said Kuhns. "If we can replicate what they are doing across the nation's 18,000+ law enforcement agencies, we are going to wind up saving a whole lot of money and time which can be devoted to other public safety priorities."

Featured

  • Tradeshow Work Can Be Fun

    While at ISC West last week, I ran into numerous friends and associates all of which was a pleasant experience. The first question always seemed to be, “How many does this make for you?” Read Now

    • Industry Events
    • ISC West
  • New Report Says 1 in 5 SMBs Would Be Forced to Shutter After Successful Cyberattack

    Small and medium-sized businesses (SMBs) play a crucial role in the U.S. economy, making up 99.9% of all businesses and contributing to half of the nation's GDP. However, these vital economic growth drivers face an escalating threat—cyberattacks that could put them out of business. Read Now

  • The Yellow Brick Road

    The road to and throughout Wednesday's and Thursday's ISC West was crowded but it was amazing. Read Now

    • Industry Events
    • ISC West
  • An Inside Look From Napco at ISC West

    Get a look into the excitement at ISC West 2025 from Napco. Hear from some of their top-tech executives live from the show floor. Read Now

    • Industry Events
    • ISC West
  • Upping the Ante

    I am not a betting man in terms of cards, dice, blackjack or that wheel with the black marble racing around the circumference of a spinning wheel, but I would bet on the success of ISC West this year. Read Now

    • Industry Events
    • ISC West

New Products

  • Unified VMS

    AxxonSoft introduces version 2.0 of the Axxon One VMS. The new release features integrations with various physical security systems, making Axxon One a unified VMS. Other enhancements include new AI video analytics and intelligent search functions, hardened cybersecurity, usability and performance improvements, and expanded cloud capabilities

  • Camden CV-7600 High Security Card Readers

    Camden CV-7600 High Security Card Readers

    Camden Door Controls has relaunched its CV-7600 card readers in response to growing market demand for a more secure alternative to standard proximity credentials that can be easily cloned. CV-7600 readers support MIFARE DESFire EV1 & EV2 encryption technology credentials, making them virtually clone-proof and highly secure.

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.