Dortronics Systems Inc.

ML 1100 Series Mortise Electronic Lock and Pull

ML 1100 Series Mortise Electronic Lock and Pull

Dortronics Systems Inc’s ML-1100 Series Mortise Electronic Lock and Pull delivers the ideal solution for areas where aesthetics and security go hand-in-hand. All the locking hardware is concealed in attractive pulls in a wide selection of plated or anodized finishes. ML-1100 mortise locks can be controlled individually or simultaneously from one or many locations. The status of the lock may be monitored by any card access system. Mortise locks are fail-safe, releasing instantly upon command or loss of power. All fasteners are stainless steel and tamper-proof. Custom engraving is available.

http://www.dortronics.com/


    Featured

    New Products

    • HD2055 Modular Barricade

      Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation.

    • Automatic Systems V07

      Automatic Systems V07

      Automatic Systems, an industry-leading manufacturer of pedestrian and vehicle secure entrance control access systems, is pleased to announce the release of its groundbreaking V07 software. The V07 software update is designed specifically to address cybersecurity concerns and will ensure the integrity and confidentiality of Automatic Systems applications. With the new V07 software, updates will be delivered by means of an encrypted file.

    • Camden CM-221 Series Switches

      Camden CM-221 Series Switches

      Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.