Keri Systems

BioSync Fingerprint Reader

BioSync Fingerprint Reader

Keri Systems’ new BioSync Fingerprint Readers provide reliable fingerprint reading in attractive and unobtrusive packages. Readers are available in fingerprint-only, fingerprint + card, and fingerprint + keypad versions. Typically used in higher security applications, these readers can be used either for primary user identification (fingerprint-only) or for secondary verification, based on initial use of a card or PIN. Readers are available with Keri NXT + HID 125 KHz Proximity or MIFARE/DESFire capabilities, and can store up to 9500 fingerprint templates. The readers are compatible with Keri’s NXT Controllers and PXL-500W Tiger Controllers, and provide industry standard, Wiegand output for compatibility with most 3rd party access control systems.


    Featured

    New Products

    • HD2055 Modular Barricade

      Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation.

    • Camden CV-7600 High Security Card Readers

      Camden CV-7600 High Security Card Readers

      Camden Door Controls has relaunched its CV-7600 card readers in response to growing market demand for a more secure alternative to standard proximity credentials that can be easily cloned. CV-7600 readers support MIFARE DESFire EV1 & EV2 encryption technology credentials, making them virtually clone-proof and highly secure.

    • Camden CM-221 Series Switches

      Camden CM-221 Series Switches

      Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.