Fire Safety Tips

Smoke alarms are proven life savers. There are more than 300,000 residential fires every year, so when there is a fire, smoke alarms buy families valuable escape time.

Unfortunately, about two-thirds of fire deaths take place in homes with no smoke alarms or with non-working smoke alarms. The most common reasons why alarms did not work were missing, disconnected, or dead batteries. Consumers need to make sure that they have a working smoke alarm.

For better warning of fire, consumers should install smoke alarms on every level of the home, outside sleeping areas, and inside bedrooms. Replace batteries annually, and test the smoke alarms monthly.

When shopping for smoke alarms, consumers should be aware of the two different types of smoke alarms: ionization and photoelectric. While both types are effective smoke sensors, ionization type detectors respond quickly to flaming fires, while photoelectric type detectors respond sooner to smoldering fires. Since consumers can't predict what types of fires might break out, CPSC staff recommends installing both ionization and photoelectric type smoke alarms throughout the home for the best warning of a fire. This recommendation is also supported by the United States Fire Administration, the National Fire Protection Association, Underwriters Laboratories, and by research conducted by the National Institute for Standards and Technology. There are also dual sensor smoke alarms that have both ionization and photoelectric sensors in one unit.

Consumers should also consider interconnected smoke alarms. Interconnected alarms are connected to each other by a hard wire or by wireless technology. If one alarm is triggered, all interconnected alarms in the home sound, alerting consumers to the fire earlier.

Many residential fires are preventable. CPSC recommends consumers follow these safety steps:

  • Never leave cooking equipment unattended.
  • Have a professional inspect home heating, cooling, and water appliances annually.
  • Inspect electrical cords for signs of wear, cracks, or age, and keep lighting away from combustibles.
  • Use caution with candles, lighters, matches, and smoking materials near upholstered furniture, mattresses, and bedding. Keep matches and lighters out of reach of young children.
  • Have a fire escape plan and practice it so family members know what to do and where to meet if there's a fire in the home. Children and the elderly may sleep through or not react to the sound of the smoke alarm, so parents and caregivers should adjust their fire escape plan to help them escape the house in the event of a fire.

Featured

New Products

  • HD2055 Modular Barricade

    Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation.

  • Camden CV-7600 High Security Card Readers

    Camden CV-7600 High Security Card Readers

    Camden Door Controls has relaunched its CV-7600 card readers in response to growing market demand for a more secure alternative to standard proximity credentials that can be easily cloned. CV-7600 readers support MIFARE DESFire EV1 & EV2 encryption technology credentials, making them virtually clone-proof and highly secure.

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.