Smart Card Alliance Calls For Review Of EPC Gen 2 RFID In Identity Documents

Recent headlines have confused U.S. electronic passports -- the passport books with the blue cover and the small gold e-passport icon -- with the new U.S. Passport Cards and Enhanced Driver’s Licenses (EDL) already being issued as border crossing credentials by some states.

The confusion came in reports about security researcher Chris Paget, who demonstrated the ease of scanning, cloning and tracking RFID-based U.S. Passport Cards and Enhanced Driver’s Licenses (EDL) in a YouTube video.

“The Smart Card Alliance wants to make it clear that this demonstration did not involve the blue U.S. electronic passport books,” said Randy Vanderhoof, executive director of the Smart Card Alliance. “Headlines stating that passports can be scanned and tracked are wrong. The widely reported demonstration involved U.S. Passport Cards and Enhanced Driver’s Licenses, which use EPC Gen 2 RFID technology. These are different travel documents and use completely different technologies from U.S. electronic passports, which use contactless smart card technology and are very privacy secure.”

With the coming of the new administration, the Smart Card Alliance recommends an immediate review of the decision to use EPC Gen 2 RFID technology in U.S. travel documents. The Alliance is prepared to endorse the correct use of any technology that provides adequate protection of privacy and identity information. However, as the U.S. Passport Card and EDL programs were being defined, the Smart Card Alliance went on record advising against using an insecure EPC Gen 2 RFID solution that put the privacy and security of U.S. citizens’ personal information at risk.

The Alliance Identity Council, whose members include technology providers of both RFID and RF-enabled contactless smart card solutions, stands ready to assist any government agency or department that undertakes such a review. The Alliance provides a cross-industry forum that can offer expert advice on how to best meet the needs of high security and throughput at border crossings without compromising the privacy of citizens’ personal information or their safety.

Passport Cards are new, State Department-issued travel documents valid primarily for crossing land borders with Canada and Mexico. They were designed to provide a less expensive and more portable alternative to the traditional blue passport book. Some border states are issuing or planning to issue special driver’s licenses, called Enhanced Driver’s Licenses (EDL), that are also valid for crossing land borders. The State Department has issued nearly 700,000 passport cards to U.S. citizens in advance of tougher border crossing rules that take effect June 1. Washington State has issued more than 10,000 EDLs, primarily to frequent visitors to nearby Vancouver, British Columbia.

The Passport Cards and EDLs that were the subject of this scanning demonstration use long range, insecure, EPC Gen 2 RFID tags, which lack encryption and authentication. It is not surprising this researcher could remotely read Passport Cards, because the RFID tag technology used in them was actually designed for tracking objects at long distances and is used mostly in manufacturing and shipping. These RFID tags have minimal built-in support for security and privacy and, for that reason, the State Department issues Passport Cards with protective sleeves to prevent them from being read when not in use.

In sharp contrast, the blue U.S. electronic passport books use RF-enabled contactless smart card technology. This is a completely different technology that includes a small computer inside the e-passport book. The U.S. e-passport is not vulnerable to the remote reading attack demonstrated on RFID-based Passport Cards and EDLs. A small gold chip icon on the book cover indicates an electronic passport.

U.S. electronic passports are very privacy-secure. A metallic shield in the cover prevents any information from being read when the book is closed. Further, it has a short read range of two inches and the chip won’t give up any information until the passport book is physically opened and a unique key that is printed inside the passport is optically scanned and sent to the chip. The U.S. Department of State calls this e-passport security Basic Access Control.

Contactless smart cards are designed for high security applications and are used in tens of millions of identity credentials and payment cards worldwide.

Featured

  • Maximizing Your Security Budget This Year

    Perimeter Security Standards for Multi-Site Businesses

    When you run or own a business that has multiple locations, it is important to set clear perimeter security standards. By doing this, it allows you to assess and mitigate any potential threats or risks at each site or location efficiently and effectively. Read Now

  • New Research Shows a Continuing Increase in Ransomware Victims

    GuidePoint Security recently announced the release of GuidePoint Research and Intelligence Team’s (GRIT) Q1 2024 Ransomware Report. In addition to revealing a nearly 20% year-over-year increase in the number of ransomware victims, the GRIT Q1 2024 Ransomware Report observes major shifts in the behavioral patterns of ransomware groups following law enforcement activity – including the continued targeting of previously “off-limits” organizations and industries, such as emergency hospitals. Read Now

  • OpenAI's GPT-4 Is Capable of Autonomously Exploiting Zero-Day Vulnerabilities

    According to a new study from four computer scientists at the University of Illinois Urbana-Champaign, OpenAI’s paid chatbot, GPT-4, is capable of autonomously exploiting zero-day vulnerabilities without any human assistance. Read Now

  • Getting in Someone’s Face

    There was a time, not so long ago, when the tradeshow industry must have thought COVID-19 might wipe out face-to-face meetings. It sure seemed that way about three years ago. Read Now

    • Industry Events
    • ISC West

Featured Cybersecurity

Webinars

New Products

  • ComNet CNGE6FX2TX4PoE

    The ComNet cost-efficient CNGE6FX2TX4PoE is a six-port switch that offers four Gbps TX ports that support the IEEE802.3at standard and provide up to 30 watts of PoE to PDs. It also has a dedicated FX/TX combination port as well as a single FX SFP to act as an additional port or an uplink port, giving the user additional options in managing network traffic. The CNGE6FX2TX4PoE is designed for use in unconditioned environments and typically used in perimeter surveillance. 3

  • PE80 Series

    PE80 Series by SARGENT / ED4000/PED5000 Series by Corbin Russwin

    ASSA ABLOY, a global leader in access solutions, has announced the launch of two next generation exit devices from long-standing leaders in the premium exit device market: the PE80 Series by SARGENT and the PED4000/PED5000 Series by Corbin Russwin. These new exit devices boast industry-first features that are specifically designed to provide enhanced safety, security and convenience, setting new standards for exit solutions. The SARGENT PE80 and Corbin Russwin PED4000/PED5000 Series exit devices are engineered to meet the ever-evolving needs of modern buildings. Featuring the high strength, security and durability that ASSA ABLOY is known for, the new exit devices deliver several innovative, industry-first features in addition to elegant design finishes for every opening. 3

  • Compact IP Video Intercom

    Viking’s X-205 Series of intercoms provide HD IP video and two-way voice communication - all wrapped up in an attractive compact chassis. 3