Carbon Monoxide Protection Tips

The National Burglar and Fire Alarm Association (NBFAA) recommends the following safety tips for protection against carbon monoxide poisoning.

  • Install CO alarms outside each sleeping area of the home and on each floor of the home. For greater protection, connect the CO alarms throughout the home so that when one activates, they all activate.
  • Adhere to all manufacturer’s guidelines and instructions for installation.
  • Identify and store all local emergency contact numbers for a CO alarm emergency. Program these numbers in your cell phone as well, in case you are not at home when an alarm activates.
  • Test monthly and confirm that each CO alarm is operating properly to the manufacturer’s instructions.
  • If the CO alarm activates, immediately relocate everyone in the home to a safe location outdoors, or move into an open doorway that leads outside.
  • Call for help only from a safe location, and remain in the safe location until emergency personnel arrive.
  • Never start and run an automobile in an enclosed area such as a garage. Simply opening a garage door is NOT sufficient ventilation.
  • In the event of a large snowstorm, ensure that all exterior dryer, furnace and/or stove vents are clear of any debris or packed snow.
  • A gas-powered generator should only be used in a well-ventilated outdoor location.
  • Never operate gas or charcoal grills indoors. Use in only outdoor manufacturer recommended locations.

Unlike smoke which can be detected by sight and smell, carbon monoxide can fill a home without any warning. Installing a monitored carbon monoxide detector in your home not only gives you peace of mind, it could also be your first line of defense.

Featured

New Products

  • Compact IP Video Intercom

    Viking’s X-205 Series of intercoms provide HD IP video and two-way voice communication - all wrapped up in an attractive compact chassis.

  • QCS7230 System-on-Chip (SoC)

    QCS7230 System-on-Chip (SoC)

    The latest Qualcomm® Vision Intelligence Platform offers next-generation smart camera IoT solutions to improve safety and security across enterprises, cities and spaces. The Vision Intelligence Platform was expanded in March 2022 with the introduction of the QCS7230 System-on-Chip (SoC), which delivers superior artificial intelligence (AI) inferencing at the edge.

  • Camden CV-7600 High Security Card Readers

    Camden CV-7600 High Security Card Readers

    Camden Door Controls has relaunched its CV-7600 card readers in response to growing market demand for a more secure alternative to standard proximity credentials that can be easily cloned. CV-7600 readers support MIFARE DESFire EV1 & EV2 encryption technology credentials, making them virtually clone-proof and highly secure.