Tips: Hotel/Motel Fire Safety

Vacations and business travel make hotels and motels our home away from home. It is just as important to be prepared and know what you would do in a hotel/motel emergency as it is in your own home. The NFPA offers fire safey tips.

Be Safe When Traveling

  • Choose a hotel/motel that is protected by both smoke alarms and a fire sprinkler system.
  • When you check in, ask the front desk what the fire alarm sounds like.
  • When you enter your room, review the escape plan posted in your room.
  • Take the time to find the exits and count the number of doors between your room and the exit.
  • Make sure the exits are unlocked. If they are locked, report it to management right away.
  • Keep your room key by your bed and take it with you if there is a fire.
  • If the alarm sounds, leave right away, closing all doors behind you. Use the stairs -- never use elevators during a fire.
  • If you must escape through smoke, get low and go under the smoke to your exit.

If You Can’t Escape

  • Shut off fans and air conditioners.
  • Stuff wet towels in the crack around the doors.
  • Call the fire department and let them know your location.
  • Wait at the window and signal with a flashlight or light colored cloth.

Featured

New Products

  • Camden CV-7600 High Security Card Readers

    Camden CV-7600 High Security Card Readers

    Camden Door Controls has relaunched its CV-7600 card readers in response to growing market demand for a more secure alternative to standard proximity credentials that can be easily cloned. CV-7600 readers support MIFARE DESFire EV1 & EV2 encryption technology credentials, making them virtually clone-proof and highly secure.

  • Compact IP Video Intercom

    Viking’s X-205 Series of intercoms provide HD IP video and two-way voice communication - all wrapped up in an attractive compact chassis.

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.