Researcher Works with Carbon Fiber to Reinforce Buildings from Explosions (With Video)

Most buildings are not constructed to withstand an unexpected explosion or impact. Now, a researcher at the University of Missouri is working with the U.S. Army to test a method of retrofitting buildings to protect them in the case of a terrorist attack.

Sarah Orton, assistant professor of civil engineering in the MU College of Engineering, has focused on using carbon fiber reinforced polymer (CFRP), a fabric that can carry 143,000 pounds of force per square inch and has various applications to strengthen reinforced concrete buildings. CFRP has been used previously to strengthen buildings for earthquakes.

"CFRP has been used in places like California since the 1980s to protect buildings from earthquakes, but it has so many applications," Orton said. "Now, we have to worry about damage caused by attacks. This fabric can be a great tool to protect people in threatened buildings."

University of Missouri researcher works with carbon fiber to reinforce buildings; protect from explosion from MU News Bureau on Vimeo.

To protect a building from an extreme event, CFRP can be used to increase the bending capacity of walls or columns. Previously, Orton invented an anchor that can be embedded in the column or joint to make CFRP more effective. In that work, Orton found that the anchors allow the CFRP to reach its full tension strength rather than separating from the concrete at only about half its strength.

CFRP can be used to protect an entire wall from an explosion. To study the effectiveness of different ways of applying CFRP, Orton worked with the U.S. Army Engineer Research and Development Center (ERDC) to detonate explosives near CFRP-reinforced concrete slabs. She found that CFRP, when layered and anchored, provided a significant amount of protection. However, she said that applying additional protection to the front of the concrete slab, such as a steel plate, would enhance the slab's performance.

Orton says the high costs of approximately $30 per square foot have kept CFRP from being widely implemented in non-earthquake prone areas.

"This is a really useful material," Orton said. "I continue to be fascinated by the material's strength and applications. Retrofitting buildings with CFRP will help protect people from attacks and potentially collapse of the building."

Featured

  • AI to Help Resolve Non-Emergency Calls Across Utah and Decrease 911 Caller Wait Times

    The Utah Communications Authority (UCA), which oversees the state’s next generation 911 technology services, recently announced that public safety answering points (PSAPs) throughout the state plan to implement Motorola Solutions’ Virtual Response technology to automate the receipt and resolution of 10-digit non-emergency line calls in Utah with the help of AI. Read Now

  • Report Reveals Local Governments Face Surge in Ransomware Attacks with Minimal Resources

    KnowBe4, the cybersecurity platform that comprehensively addresses human risk management, recently released new research highlighting the critical cybersecurity challenges facing state, local, tribal, and territorial (SLTT) governments. The report details how government organizations have become prime targets for cybercriminals while simultaneously facing severe resource constraints. Read Now

  • Video Surveillance Trends to Watch

    With more organizations adding newer capabilities to their surveillance systems, it’s always important to remember the “basics” of system configuration and deployment, as well as the topline benefits of continually emerging technologies like AI and the cloud. Read Now

  • New Report Reveals Top Trends Transforming Access Controller Technology

    Mercury Security, a provider in access control hardware and open platform solutions, has published its Trends in Access Controllers Report, based on a survey of over 450 security professionals across North America and Europe. The findings highlight the controller’s vital role in a physical access control system (PACS), where the device not only enforces access policies but also connects with readers to verify user credentials—ranging from ID badges to biometrics and mobile identities. With 72% of respondents identifying the controller as a critical or important factor in PACS design, the report underscores how the choice of controller platform has become a strategic decision for today’s security leaders. Read Now

  • Overwhelming Majority of CISOs Anticipate Surge in Cyber Attacks Over the Next Three Years

    An overwhelming 98% of chief information security officers (CISOs) expect a surge in cyber attacks over the next three years as organizations face an increasingly complex and artificial intelligence (AI)-driven digital threat landscape. This is according to new research conducted among 300 CISOs, chief information officers (CIOs), and senior IT professionals by CSC1, the leading provider of enterprise-class domain and domain name system (DNS) security. Read Now

New Products

  • Compact IP Video Intercom

    Viking’s X-205 Series of intercoms provide HD IP video and two-way voice communication - all wrapped up in an attractive compact chassis.

  • PE80 Series

    PE80 Series by SARGENT / ED4000/PED5000 Series by Corbin Russwin

    ASSA ABLOY, a global leader in access solutions, has announced the launch of two next generation exit devices from long-standing leaders in the premium exit device market: the PE80 Series by SARGENT and the PED4000/PED5000 Series by Corbin Russwin. These new exit devices boast industry-first features that are specifically designed to provide enhanced safety, security and convenience, setting new standards for exit solutions. The SARGENT PE80 and Corbin Russwin PED4000/PED5000 Series exit devices are engineered to meet the ever-evolving needs of modern buildings. Featuring the high strength, security and durability that ASSA ABLOY is known for, the new exit devices deliver several innovative, industry-first features in addition to elegant design finishes for every opening.

  • Mobile Safe Shield

    Mobile Safe Shield

    SafeWood Designs, Inc., a manufacturer of patented bullet resistant products, is excited to announce the launch of the Mobile Safe Shield. The Mobile Safe Shield is a moveable bullet resistant shield that provides protection in the event of an assailant and supplies cover in the event of an active shooter. With a heavy-duty steel frame, quality castor wheels, and bullet resistant core, the Mobile Safe Shield is a perfect addition to any guard station, security desks, courthouses, police stations, schools, office spaces and more. The Mobile Safe Shield is incredibly customizable. Bullet resistant materials are available in UL 752 Levels 1 through 8 and include glass, white board, tack board, veneer, and plastic laminate. Flexibility in bullet resistant materials allows for the Mobile Safe Shield to blend more with current interior décor for a seamless design aesthetic. Optional custom paint colors are also available for the steel frame.