Fourth of July Firework Safety Tips

Using consumer fireworks on our nation's birthday is as traditional as cookouts and parades. And it is equally safe if a few common sense rules are followed, says Dr. John Steinberg, a member of the Board of Directors of the National Council on Fireworks Safety. But he notes, according to the U.S. Consumer Product Safety Commission, there were an estimated 5,900 fireworks-related injuries during the Fourth of July season in 2009.

These injuries would not have occurred if there had been close adult supervision and if some basic safety steps had been taken. The National Council on Fireworks Safety offers these common sense fireworks tips in the hopes that injuries to consumers can be greatly reduced this season:

  • Parents and caretakers should always closely supervise teens if they are using fireworks.
  • Parents should not allow young children to handle or use fireworks.
  • Fireworks should only be used outdoors.
  • Always have water ready if you are shooting fireworks.
  • Know your fireworks. Read the caution label before igniting.
  • Obey local laws. If fireworks are not legal where you live, do not use them.
  • Alcohol and fireworks do not mix. Save your alcohol for after the show.
  • Wear safety glasses whenever using fireworks.
  • Never relight a "dud" firework. Wait 20 minutes and then soak it in a bucket of water.
  • Soak spent fireworks with water before placing them in an outdoor garbage can.
  • Avoid using homemade fireworks or illegal explosives: They can kill you.
  • Report illegal explosives, like M-80s and quarter sticks, to the fire or police department.

The National Council on Fireworks Safety urges Americans to follow common sense safety rules this Fourth of July in their holiday celebrations.

Featured

New Products

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.

  • HD2055 Modular Barricade

    Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation.

  • Automatic Systems V07

    Automatic Systems V07

    Automatic Systems, an industry-leading manufacturer of pedestrian and vehicle secure entrance control access systems, is pleased to announce the release of its groundbreaking V07 software. The V07 software update is designed specifically to address cybersecurity concerns and will ensure the integrity and confidentiality of Automatic Systems applications. With the new V07 software, updates will be delivered by means of an encrypted file.