Trendy Protection

Trendy Protection

Beyond the glamour, Beverly Hills faces the same fire and security issues as everyone else

Beverly Hills, Calif., has been glamorized in countless film and television depictions as the home of the wealthy and famous. Beyond the glamour, though, it has municipal management issues much like those any city faces.

In particular, Roy Johnson, the city’s chief engineer, has long been frustrated that the municipal buildings in his purview often had different, mutually incompatible, and sometimes antiquated fire alarm and building emergency management systems (EMS). This made maintenance more complex and costly and potentially limited response capabilities in emergencies.

Johnson was determined to reduce the legacy clutter of multiple vendors and systems operating in the city hall, library, police headquarters, fire department and other facilities. He also wanted to enhance functionality in areas such as emergency communications. With those goals in mind, Johnson took steps to upgrade and standardize around a single vendor family that would reduce costs, simplify monitoring and facilitate future expansion and reconfiguration.

Phased-In Solution
Johnson teamed up with JAM Fire Protection Inc., a Los Angeles-area fire alarm/ life safety systems integrator. Together, they determined that the most cost-effective choice compliant with the requirements of The National Fire Alarm & Signaling Code, NFPA 72 and the California state fire marshal (CSFM) was the E3 Series fire alarm and emergency communications system produced by Gamewell-FCI.

Once the city’s equipment procurement decisions were made, Johnson began the process of updating each building he was responsible for, making the changes whenever a building underwent a major renovation.

“We started out about 10 years ago when we were remodeling the library,” he said. But Johnson didn’t just want to simplify—he wanted to improve safety capabilities along the way. “The library project was an opportunity to embrace Americans with Disabilities Act (ADA) standards, using alarms that incorporate strobe lights, as specified by NFPA 72.”

More recently, Johnson noted several historic city structures that needed updating. That presented an opportunity to network the fire alarm systems within and between buildings to simplify system monitoring and speed response to alarms and maintenance alerts.

The Gamewell-FCI FocalPoint graphic workstation, located in Johnson’s central plant office, provides facility managers and first responders an integrated view of the entire network of systems. An event history and floor-by-floor layouts of every building, depicting fire alarm components and special notations such as hazardous materials storage or occupants needing assistance, are all part of this monitoring system’s customized graphics. The city’s FocalPoint system also is programmed to deliver alerts to standard mobile devices, providing a full description of any emergency events in real time.

“For Beverly Hills, FocalPoint was the key,” said John Mongillo, president of JAM Fire Protection. “They had a LAN, so it was natural for them to tie communications for all buildings together from one location. That makes it less laborintensive and easier to run with just one person.”

According to JAM Fire Protection, the city did not originally specify an emergency communication or mass notification system as part of these updates. However, when Beverly Hills officials saw the library’s system demonstrate this capability, they were impressed with its value for this and other municipal buildings. The E3 Series can be enhanced with programming and the necessary Local Operator Consoles (LOCs) to offer a supervised method to immediately notify some or all areas of the network amid disaster or public safety situations.

Installation Efficiencies
Mongillo said that modern alarm systems can now be supplemented and upgraded affordably with many new capabilities. For instance, Gamewell-FCI’s E3 Series systems require only a single, twisted pair of wires or two fiber optic cables. Furthermore, Mongillo said the affordability of scalable fire alarm and emergency communications systems such as the E3 series allows it to be expanded incrementally, as budgets allow.

JAM’s installation approach for Beverly Hills involved using existing conduit runs and equipment when possible while adding new technology to provide additional voice communication and the ability to monitor the entire network through the FocalPoint workstation. Mongillo said his company has used the same cost-effective approach for other customers, such as the city of Carson, Calif.

Both Carson and Beverly Hills were able to take advantage of existing LAN systems, which reduced the need for new physical connections, and both municipalities needed alarm upgrades because their existing technology was 30 to 40 years old.

Project Elements
Over the course of the project, many of the city’s major municipal buildings have been re-equipped and modernized.

City hall has been upgraded with a Gamewell- FCI E3 Series fire alarm with voice evacuation. This historic building, built in 1932, presented special challenges to installers, who had to work around decorative facades and ceilings. The building’s fire alarm system provides full-area coverage with approximately 250 sensors. It also provides smoke control through interfaces with elevators, HVAC and access control systems.

Equally challenging was the work in the police headquarters, which is now protected by an E3 Series network. The fire alarm system was installed as part of a major renovation, which included the addition of a new emergency operations center. Further upgrades to the system were made during the renovation of three lower levels underground, which included a new state-of-the-art indoor firing range. The system is using 180 new addressable sensors and modules and approximately 60 hard-wire zones with standard interfaces to HVAC, six banks of elevators and access control.

At the fire department headquarters, another E3 Series networked voice evacuation system with four nodes was installed. The retrofit of the fire alarm system was completed using 180 sensors with full sprinkler coverage in three buildings.

Buildings recently constructed include the Third Street parking facility and an office building at 331 Foothill Road. The garage is equipped with a Gamewell-FCI E3 Series voice evacuation network system with two nodes, while the office building required only a small, standalone E3 Series system.

Projects transforming a historic post office building into a theater and constructing an adjacent underground parking garage are underway. Given the E3 Series’ scalable capacity and ease of expandability, the fire protection systems for these buildings will also tie into the network to simplify monitoring and maintenance.

Mongillo stressed that the networked system does not alter the basic alarm system. All buildings’ systems can still operate independently if the network is unavailable. It’s meant to be fail-safe. The E3 Series is designed to be “survivable,” so if one or more system components are damaged, a distributed audio design helps ensure the continuity of clear, accurate communications.

With the majority of planned retrofits complete, Johnson has more than sufficient capabilities available from his office—an EMS monitor and the FocalPoint network graphic workstation managing a sophisticated network of five fire alarm and emergency communications systems throughout the city’s core. Work will soon begin to equip additional buildings.

“Our city has always tried to be on the cutting edge,” Johnson said. “Back in the 1930s, we installed a Gamewell fire alarm call box system around the city, which was state-of-the-art for the time, and that system stayed in service for decades.”

The fire department still retains and displays, in working condition, the original Gamewell master box system used to protect the city of Beverly Hills.

This article originally appeared in the September 2011 issue of Security Today.

Featured

  • Maximizing Your Security Budget This Year

    Perimeter Security Standards for Multi-Site Businesses

    When you run or own a business that has multiple locations, it is important to set clear perimeter security standards. By doing this, it allows you to assess and mitigate any potential threats or risks at each site or location efficiently and effectively. Read Now

  • New Research Shows a Continuing Increase in Ransomware Victims

    GuidePoint Security recently announced the release of GuidePoint Research and Intelligence Team’s (GRIT) Q1 2024 Ransomware Report. In addition to revealing a nearly 20% year-over-year increase in the number of ransomware victims, the GRIT Q1 2024 Ransomware Report observes major shifts in the behavioral patterns of ransomware groups following law enforcement activity – including the continued targeting of previously “off-limits” organizations and industries, such as emergency hospitals. Read Now

  • OpenAI's GPT-4 Is Capable of Autonomously Exploiting Zero-Day Vulnerabilities

    According to a new study from four computer scientists at the University of Illinois Urbana-Champaign, OpenAI’s paid chatbot, GPT-4, is capable of autonomously exploiting zero-day vulnerabilities without any human assistance. Read Now

  • Getting in Someone’s Face

    There was a time, not so long ago, when the tradeshow industry must have thought COVID-19 might wipe out face-to-face meetings. It sure seemed that way about three years ago. Read Now

    • Industry Events
    • ISC West

Featured Cybersecurity

Webinars

New Products

  • Hanwha QNO-7012R

    Hanwha QNO-7012R

    The Q Series cameras are equipped with an Open Platform chipset for easy and seamless integration with third-party systems and solutions, and analog video output (CVBS) support for easy camera positioning during installation. A suite of on-board intelligent video analytics covers tampering, directional/virtual line detection, defocus detection, enter/exit, and motion detection. 3

  • Luma x20

    Luma x20

    Snap One has announced its popular Luma x20 family of surveillance products now offers even greater security and privacy for home and business owners across the globe by giving them full control over integrators’ system access to view live and recorded video. According to Snap One Product Manager Derek Webb, the new “customer handoff” feature provides enhanced user control after initial installation, allowing the owners to have total privacy while also making it easy to reinstate integrator access when maintenance or assistance is required. This new feature is now available to all Luma x20 users globally. “The Luma x20 family of surveillance solutions provides excellent image and audio capture, and with the new customer handoff feature, it now offers absolute privacy for camera feeds and recordings,” Webb said. “With notifications and integrator access controlled through the powerful OvrC remote system management platform, it’s easy for integrators to give their clients full control of their footage and then to get temporary access from the client for any troubleshooting needs.” 3

  • ResponderLink

    ResponderLink

    Shooter Detection Systems (SDS), an Alarm.com company and a global leader in gunshot detection solutions, has introduced ResponderLink, a groundbreaking new 911 notification service for gunshot events. ResponderLink completes the circle from detection to 911 notification to first responder awareness, giving law enforcement enhanced situational intelligence they urgently need to save lives. Integrating SDS’s proven gunshot detection system with Noonlight’s SendPolice platform, ResponderLink is the first solution to automatically deliver real-time gunshot detection data to 911 call centers and first responders. When shots are detected, the 911 dispatching center, also known as the Public Safety Answering Point or PSAP, is contacted based on the gunfire location, enabling faster initiation of life-saving emergency protocols. 3