Department of Defense Announces Successful Test of Army Advanced Hypersonic Weapon Concept

The U.S. Army Space and Missile Defense Command/Army Forces Strategic Command conducted the first test flight of the Advanced Hypersonic Weapon (AHW) concept. A first-of-its-kind glide vehicle, designed to fly within the earth’s atmosphere at hypersonic speed and long range, was launched from the Pacific Missile Range Facility, Kauai, Hawaii to the Reagan Test Site, U.S. Army Kwajalein Atoll.

The objective of the test is to collect data on hypersonic boost-glide technologies and test range performance for long-range atmospheric flight. Mission emphasis is aerodynamics; navigation, guidance, and control; and thermal protection technologies.

A three-stage booster system launched the AHW glide vehicle and successfully deployed it on the desired flight trajectory. The vehicle flew a non-ballistic glide trajectory at hypersonic speed to the planned impact location at the Reagan Test Site. Space, air, sea and ground platforms collected vehicle performance data during all phases of flight. The data collected will be used by the Department of Defense to model and develop future hypersonic boost-glide capabilities.

The AHW program is managed and executed by the U.S. Army Space and Missile Defense Command/Army Forces Strategic Command program office in Huntsville, Ala. The booster system and glide vehicle were developed by Sandia National Laboratories, Albuquerque, N.M. and the thermal protection system by the U.S. Army Aviation and Missile Research Development and Engineering Center, Huntsville, Ala.

The Department of Defense is using AHW to develop and demonstrate technologies for Conventional Prompt Global Strike (CPGS). As part of the CPGS effort, the Defense Advanced Research Projects Agency conducted boost-glide flight tests in April 2010 and August 2011, results from which were used in planning the AHW flight test. 

Featured

New Products

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.

  • PE80 Series

    PE80 Series by SARGENT / ED4000/PED5000 Series by Corbin Russwin

    ASSA ABLOY, a global leader in access solutions, has announced the launch of two next generation exit devices from long-standing leaders in the premium exit device market: the PE80 Series by SARGENT and the PED4000/PED5000 Series by Corbin Russwin. These new exit devices boast industry-first features that are specifically designed to provide enhanced safety, security and convenience, setting new standards for exit solutions. The SARGENT PE80 and Corbin Russwin PED4000/PED5000 Series exit devices are engineered to meet the ever-evolving needs of modern buildings. Featuring the high strength, security and durability that ASSA ABLOY is known for, the new exit devices deliver several innovative, industry-first features in addition to elegant design finishes for every opening.

  • Mobile Safe Shield

    Mobile Safe Shield

    SafeWood Designs, Inc., a manufacturer of patented bullet resistant products, is excited to announce the launch of the Mobile Safe Shield. The Mobile Safe Shield is a moveable bullet resistant shield that provides protection in the event of an assailant and supplies cover in the event of an active shooter. With a heavy-duty steel frame, quality castor wheels, and bullet resistant core, the Mobile Safe Shield is a perfect addition to any guard station, security desks, courthouses, police stations, schools, office spaces and more. The Mobile Safe Shield is incredibly customizable. Bullet resistant materials are available in UL 752 Levels 1 through 8 and include glass, white board, tack board, veneer, and plastic laminate. Flexibility in bullet resistant materials allows for the Mobile Safe Shield to blend more with current interior décor for a seamless design aesthetic. Optional custom paint colors are also available for the steel frame.