RSI Video Technologies Showcases XTO Panel

RSI Video Technologies is a provider of wireless video verification alarm systems. Ten years ago it introduced the first wireless alarm system with video verification running 100 percent on batteries. More recently it brought to the market GPRS connectivity as a mean to transmit the video back to the ARC. With the advent of ADSL and other network capabilities the intruder alarm industry is turning to LAN and broadband for video transmission. RSI systems are used from residential applications to commercial and outdoor to provide immediate video alarm verification in all types of applications.

This year at Security Essen, RSI Video Technologies will focus on the XTO. The panel is ideal for applications such as construction sites, utilities, and vulnerable remote assets, and features an XT control panel and booster RF and GPRS antennas inside an IP rated box.

Like other RSI panels the XTO can link to up to 24 PIR cameras and is suited to locations where the panel needs to be mounted outdoors and where there is no mains power. The booster antennas enable the system to provide security to large areas even where there is a poor GPRS signal.

Featured

New Products

  • HD2055 Modular Barricade

    Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation.

  • 4K Video Decoder

    3xLOGIC’s VH-DECODER-4K is perfect for use in organizations of all sizes in diverse vertical sectors such as retail, leisure and hospitality, education and commercial premises.

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.