Rush to Security

Rush to Security

Medical center simplifies with wireless, electronic locks

Rush to Security Medical center simplifies with wireless, electronic locks

When Rush University Medical Center incorporated wireless electronic locks throughout its new 375-bed-tower hospital building, it made installation easier and more cost-effective while providing greater flexibility to meet future security needs.

Rush is a not-for-profit, academic medical center that includes Rush University Medical Center, Rush University, Rush Oak Park Hospital and Rush Health. This medical center encompasses a 664-bed hospital that serves adults and children, and includes the new 14-story-tower hospital building, the largest new construction healthcare project in the world to earn LEED (Leadership in Energy and Environmental Design) Gold certification.

As part of its master plan, Rush wanted an access control system that could be expanded to meet its needs over the next ten years, not only for the tower but also across its other 25 buildings. Additional important criteria were flexibility, dependability and straight-forward, diagnostic evaluation that could be handled by the hospital’s technical engineering team.

To meet these needs, the hospital selected a system built around wireless, electronic locks with integrated readers. This combination of locks and readers provide online, real-time access control and are uniquely designed with easily changeable reader modules so they can be upgraded in the future without changing the entire lock. They combine all the required hardware components into one integrated design that incorporates the electrified lock, credential reader, request-to-exit switch, door position switch, tamper guard and more.

Moving into Wireless Access Control

Rush’s interest in wireless, electronic security began several years ago with a central kitchen project that required a large amount of wiring to install electronic security.

Mike Craig, the medical center engineering electric/electronic manager, said that they tested a wireless lock at the time and decided to use wireless access control wherever possible because of cost savings and convenience. The tower project provided an opportunity to achieve greater savings by incorporating wireless security on a larger scale.

“Once we install a panel to interface with our security system, we can handle up to 16 locks on that floor without installing pipe and pulling wires,” Craig said.

“We save the cost of these materials and the time it takes to put them in place.”

The wireless system provides greater flexibility in changing or adding locks in the future. The initial installation began with more than 500 locks, and the system will soon encompass more than 900 locks. Craig said that he currently has the locks in about half of the complex.

“Anytime we have a new capital project, whether they’re doing an entire floor or suite, we put a wireless lock on areas, like the electrical closets and the janitor closets, where we have issues with access and key control.”

The electronic locks are requested by users for convenience and better control.

“Our legal department just requested four of the locks, because they wanted to do away with keys,” said Craig.

In some cases, the wireless locks are used to separate public areas from restricted areas, such as private offices or cross corridors between buildings. While keys may be used on the offices or suites within these areas, access to the actual areas is controlled by card readers.

Upgrading the Key System

Along with its expansion of electronic security, Rush is upgrading its key system. Mechanical keys are used in many applications throughout the hospital, for overrides on the electronic locks and in areas where the number of users is small and does not change often. The previous system had been expanded to more than 8,000 cylinders, going far beyond the capabilities of the initial plan. There were seven or eight different keyways, and it was becoming impossible to know who had all the keys and masters.

To regain key control and simplify management of an ever-expanding system, the hospital worked with Allegion to develop a new key control plan, using a patent-protected family of keyways. The patent-protected, undercut design offers protection through 2029 while delivering a higher level of security, since it cannot be duplicated without authorization.

“The cores and the keys aren’t going to anybody else,” Craig said. “I was looking for something that someone couldn’t go down to the local hardware store and have a key cut.”

An Expandable System

Rush is working with an Allegion consultant to develop a system that will be expandable for at least the next 10 years, without creating another master. To keep track of the new keys, the hospital will use a key management software system that manages key distribution and is expandable to meet future needs.

“We’re working through the Annex building and doing some of the smaller buildings first to get them coordinated before we go forward,” Craig said. “I think it will be about a two-year process to complete the conversion.”

Other hardware solutions include automatic door operators, exit devices, door closers, hospital latches and hold-opens, and hinges. More than 90 of the automatic door operators will be installed to replace previously-installed products. These operators are now being tested on doors leading to and from operating room areas where they help prevent the spread of infectious diseases, but eventually, they will be used throughout the buildings.

All of these solutions are being incorporated into a revised and updated product specification guide that Rush uses to help unify door and security hardware throughout its facilities. Standardizing makes it easier for the hospital’s staff to stock parts and perform maintenance when needed. Craig noted that products included in these standards are evaluated based on expected life, service needs, parts availability and other factors, as well as cost.

“We always have new architects and project managers, so this helps us keep things consistent with what we already have.”

This article originally appeared in the April 2014 issue of Security Today.

Featured

  • AI to Help Resolve Non-Emergency Calls Across Utah and Decrease 911 Caller Wait Times

    The Utah Communications Authority (UCA), which oversees the state’s next generation 911 technology services, recently announced that public safety answering points (PSAPs) throughout the state plan to implement Motorola Solutions’ Virtual Response technology to automate the receipt and resolution of 10-digit non-emergency line calls in Utah with the help of AI. Read Now

  • Report: 2025 Video Surveillance Market Set to Grow After Small Decline in 2024

    Novaira Insights has unveiled its latest report, “World Market for Video Surveillance Hardware and Software – 2025 Edition.” The research indicates that the global market for video surveillance hardware and software experienced a slight decline of 0.3% in 2024. This performance fell short of previous forecasts, primarily due to a significant decrease of 7.8% in the Chinese market. Conversely, the rest of the world saw a growth of 4.9%. The global market for video surveillance equipment was estimated to be worth $25.0 billion in 2024. Read Now

  • Report Reveals Local Governments Face Surge in Ransomware Attacks with Minimal Resources

    KnowBe4, the cybersecurity platform that comprehensively addresses human risk management, recently released new research highlighting the critical cybersecurity challenges facing state, local, tribal, and territorial (SLTT) governments. The report details how government organizations have become prime targets for cybercriminals while simultaneously facing severe resource constraints. Read Now

  • Video Surveillance Trends to Watch

    With more organizations adding newer capabilities to their surveillance systems, it’s always important to remember the “basics” of system configuration and deployment, as well as the topline benefits of continually emerging technologies like AI and the cloud. Read Now

  • New Report Reveals Top Trends Transforming Access Controller Technology

    Mercury Security, a provider in access control hardware and open platform solutions, has published its Trends in Access Controllers Report, based on a survey of over 450 security professionals across North America and Europe. The findings highlight the controller’s vital role in a physical access control system (PACS), where the device not only enforces access policies but also connects with readers to verify user credentials—ranging from ID badges to biometrics and mobile identities. With 72% of respondents identifying the controller as a critical or important factor in PACS design, the report underscores how the choice of controller platform has become a strategic decision for today’s security leaders. Read Now

New Products

  • Compact IP Video Intercom

    Viking’s X-205 Series of intercoms provide HD IP video and two-way voice communication - all wrapped up in an attractive compact chassis.

  • QCS7230 System-on-Chip (SoC)

    QCS7230 System-on-Chip (SoC)

    The latest Qualcomm® Vision Intelligence Platform offers next-generation smart camera IoT solutions to improve safety and security across enterprises, cities and spaces. The Vision Intelligence Platform was expanded in March 2022 with the introduction of the QCS7230 System-on-Chip (SoC), which delivers superior artificial intelligence (AI) inferencing at the edge.

  • 4K Video Decoder

    3xLOGIC’s VH-DECODER-4K is perfect for use in organizations of all sizes in diverse vertical sectors such as retail, leisure and hospitality, education and commercial premises.