healthcare workers

House of Representatives Passes Bill Addressing Violence Against Healthcare Workers

The legislation faces a tough road ahead in the Senate and a potential veto from the Trump administration, which opposes the current version of the bill.

Despite a veto threat from the Trump administration, the House of Representatives passed a bill on Thursday that would require the Labor Department’s Occupational Health and Safety Administration to develop rules to protect healthcare workers from violence in the workplace.

More than two dozen Republicans joined a majority of Democrats to support the Workplace Violence Prevention for Health Care and Social Service Workers Act, which passed 251-158, Bloomberg Law reported. The bill directs OSHA to issue new standards requiring healthcare and social service employers to create and implement workplace violence prevention plans.

The Labor Department would have 42 months after the bill’s enactment to develop and issue the standards. The rule must require at least the same level of protection as any state workplace violence plan OSHA has approved.

A growing number of healthcare workers face violence and assaults in the workplace. In 2016, the Government Accountability Office found that rates of violence against healthcare workers were up to 12 times higher than rates for the overall workforce. That’s in addition to the fact that 70 percent of nonfatal workplace assaults that year took place in the healthcare and social service sectors.

In a statement, the bill’s main sponsor, Rep. Joe Courtney (D-Conn.), said that the legislation’s passage was the culmination of a seven-year effort to require OSHA to address violence against people employed in the healthcare and social service sectors.

“These are some of the same people we depend on to take care of us when we need it most, and they shouldn’t have to fear for their own lives while they’re at work trying to save ours,” Courtney said.

Courtney called on Senate Majority Leader Mitch McConnell (R-Ky.) to allow senators to debate and vote on the legislation, acknowledging that the legislation faces some hurdles in order to be signed into law.

One of those obstacles will be the Trump administration’s opposition to the bill, which its critics say will cost OSHA too much money to implement. The White House’s Office of Management and Budget said it would recommend a veto because the law would require nationwide adoption of workplace violence regulations in California, which are more strict than other states.

“At a minimum, the administration does not support turning one state’s standard into a national standard without a cost-benefit analysis to assess whether doing so might benefit workers,” the Office of Management and Budget said in reference to California’s rules, according to Bloomberg Law. “The administration also believes the bill’s timelines for issuing the interim final, proposed final, and final standards are inappropriate.”

Other Republicans in the House voiced concerns that the bill would allow OSHA to move ahead with new rules without including feedback from small businesses and the public. Rep. Virginia Foxx (R-N.C.) said on the House floor that the bill also ignores data-centric approaches to addressing workplace violence.

“Currently, there is no agreed-upon set of policies to prevent and mitigate workplace violence for health care and social service workers, and researchers in the field have pointed out the need for additional studies to determine the most effective response,” Foxx said, adding that “H.R. 1309 is not the right way to address this important issue.”

Still, the bill has received widespread support from healthcare workers associations and labor unions. AFL-CIO Secretary-Treasurer Liz Shuler said that these workers, particularly women, are at greatest risk of workplace violence and deserve higher degrees of protection.

"This bill is about protecting their lives, and every single senator should follow the House’s lead and be clamoring to vote for this critical, life-saving legislation,” Shuler said.

About the Author

Haley Samsel is an Associate Content Editor for the Infrastructure Solutions Group at 1105 Media.

Featured

  • 2025 Security LeadHER Conference Program Announced

    ASIS International and the Security Industry Association (SIA) – the leading membership associations for the security industry – have announced details for the 2025 Security LeadHER conference, a special event dedicated to advancing, connecting and empowering women in the security profession. The third annual Security LeadHER conference will be held Monday, June 9 – Tuesday, June 10, 2025, at the Detroit Marriott Renaissance Center in Detroit, Michigan. This carefully crafted program represents a comprehensive professional development opportunity for women in security this year. To view the full lineup at this year’s event, please visit securityleadher.org. Read Now

    • Industry Events
  • Report: 82 Percent of Phishing Emails Used AI

    KnowBe4, the world-renowned cybersecurity platform that comprehensively addresses human risk management, today launched its Phishing Threat Trend Report, detailing key trends, new data, and threat intelligence insights surrounding phishing threats targeting organizations at the start of 2025. Read Now

  • NRF Supports Federal Bill to Thwart Retail Crime

    The National Retail Federation recently announced its support for the Combating Organized Retail Crime Act of 2025. The act was introduced by Chairman Chuck Grassley, R-Iowa, Senator Catherine Cortez Masto, D-Nev., and Representative Dave Joyce, R-Ohio. Read Now

  • ISC West 2025 Brings Almost 29,000 Industry Professionals to Las Vegas

    ISC West 2025, organized by RX and in collaboration with the Security Industry Association, concluded at the Venetian Expo in Las Vegas last week. The nation’s leading comprehensive and converged security event attracted nearly 29,000 industry professionals and left a lasting impression on the global security community. Over five action-packed days, ISC West welcomed more than 19,000 attendees and featured 750 exhibiting brands. Read Now

    • Industry Events
    • ISC West
  • Tradeshow Work Can Be Fun

    While at ISC West last week, I ran into numerous friends and associates all of which was a pleasant experience. The first question always seemed to be, “How many does this make for you?” Read Now

    • Industry Events
    • ISC West

New Products

  • PE80 Series

    PE80 Series by SARGENT / ED4000/PED5000 Series by Corbin Russwin

    ASSA ABLOY, a global leader in access solutions, has announced the launch of two next generation exit devices from long-standing leaders in the premium exit device market: the PE80 Series by SARGENT and the PED4000/PED5000 Series by Corbin Russwin. These new exit devices boast industry-first features that are specifically designed to provide enhanced safety, security and convenience, setting new standards for exit solutions. The SARGENT PE80 and Corbin Russwin PED4000/PED5000 Series exit devices are engineered to meet the ever-evolving needs of modern buildings. Featuring the high strength, security and durability that ASSA ABLOY is known for, the new exit devices deliver several innovative, industry-first features in addition to elegant design finishes for every opening.

  • Connect ONE’s powerful cloud-hosted management platform provides the means to tailor lockdowns and emergency mass notifications throughout a facility – while simultaneously alerting occupants to hazards or next steps, like evacuation.

    Connect ONE®

    Connect ONE’s powerful cloud-hosted management platform provides the means to tailor lockdowns and emergency mass notifications throughout a facility – while simultaneously alerting occupants to hazards or next steps, like evacuation.

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.