SALTO Achieves Carbon Neutrality

In 2015, the United Nations Climate Change Conference reached a global pact (the Paris Agreement): to mitigate the effects of climate change and achieve neutrality by 2050. Neutral greenhouse gas emissions are achieved when the same amount of greenhouse gases (CO2 equivalent) emitted are removed from the atmosphere in different ways. This does not mean human activities cannot emit any CO2, but it does imply that we cannot generate more than we can remove.

SALTO Systems has achieved carbon neutrality thanks to its participation in two innovative projects with a triple-transformative effect on the economy, society and nature to achieve SALTO's goal: for its operations to have zero impact on the climate.

A SALTO Systems initiative that is preceded by ambitious emission reduction targets and that, subsequently, aims to offset emissions that could not be avoided.

In order to accelerate decarburization and contribute to achieving the emission-reduction goals set by the Paris Agreement and the UN Sustainable Development Goals, SALTO is committed to promoting environmental recovery projects through revegetation, in order to offset CO2 emissions by sequestering them in tree species.

In total, the 1,721 tons of CO2 generated in 2020 (359 at its headquarters in Oiartzun, Gipuzkoa in Spain and 1,362 across its worldwide network of offices and group companies) were offset in 2021 through two ground-breaking projects: River Chinchiná Forestry Project, Colombia (Fundación Ecodes and CeroCO2): Reforestation and protection of hydrographic basins in the Andes, and Apadrina un Olivo (Sponsor an Olive Tree) in Teruel, Spain, which fights to recover olive groves, as well as against depopulation and the abandonment of olive groves in Spain.

The global pandemic put a spotlight on the value of environmental, social and corporate governance considerations. In addition to having a positive environmental impact, contribute to the fight against climate change and positively influence the local society and economy, so not only do they regenerate neglected natural spaces and protect biodiversity, but also foster the socio-economic growth of local communities.

Featured

New Products

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.

  • HD2055 Modular Barricade

    Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation.

  • Automatic Systems V07

    Automatic Systems V07

    Automatic Systems, an industry-leading manufacturer of pedestrian and vehicle secure entrance control access systems, is pleased to announce the release of its groundbreaking V07 software. The V07 software update is designed specifically to address cybersecurity concerns and will ensure the integrity and confidentiality of Automatic Systems applications. With the new V07 software, updates will be delivered by means of an encrypted file.