Bosch Security Systems

Video Recording Manager

Bosch Security's Video Recording Manager (VRM) is designed for centralized management of iSCSI recording from IP cameras and encoders within an IP-based CCTV network. The system-wide recording management tool for its direct-to-iSCSI RAID storage enables IP cameras and encoders to stream directly to disk. VRM pools all iSCSI RAIDs in a system and, after dividing the total capacity into 1 GB storage blocks, allocates storage on demand to IP cameras and encoders. The software distributes video across the various iSCSI disk arrays on the network.


    Featured

    New Products

    • Unified VMS

      AxxonSoft introduces version 2.0 of the Axxon One VMS. The new release features integrations with various physical security systems, making Axxon One a unified VMS. Other enhancements include new AI video analytics and intelligent search functions, hardened cybersecurity, usability and performance improvements, and expanded cloud capabilities

    • HD2055 Modular Barricade

      Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation.

    • Camden CM-221 Series Switches

      Camden CM-221 Series Switches

      Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.