Skip to main content

Aerionics

Macurco MRS 485

Macurco MRS 485

The Macurco MRS-485 output is connected via a four terminal screw type connector.

The MRS-485 is wired in the standard 2W-Modbus circuits definition with selectable built-in terminating resistors at the ends of the RS-485 bus.

The power for the MRS-485 adapter is connected via a two terminal screw type connector, 12 to 24 VAC or 12 to 24 VDC and no polarity. The MRS-485 accepts the 4-20mA output and is powered from the same connection as the detector.

The MRS-485 has the ability to interface with Building Automation Systems, Control Panels or other Control Devices that accept Modbus communications. MRS-485 operates in the RTU Modbus Transmission Mode.

The Macurco 6-series is a family of fully programmable, low voltage, dual relay gas detectors, controllers and transducers for BAS, HVAC and Fire and Security applications.

http://www.aerionics.info/macurco.html


    Featured

    Most   Popular

    New Products

    • GroundAware® GA1360LH 2D 360-Degree Radar

      Protect up to 750 acres with a single sensor, delivering extended 1 km+ target detection, all-weather tracking and automated intrusion deterrence for critical infrastructure.

    • Compact IP Video Intercom

      Viking’s X-205 Series of intercoms provide HD IP video and two-way voice communication - all wrapped up in an attractive compact chassis.

    • ROAMEO and SARA new product image

      AITX ROAMEO™ and SARA™

      Deploy a unified, self-coordinating outdoor security presence by combining ROAMEO’s autonomous patrol capabilities with SARA’s proactive event assessment and real-time response.