System Sensor

SpectrAlert Advance Low Frequency Sounders and Sounder Strobes

SpectrAlert Advance Low Frequency Sounders and Sounder Strobes

System Sensor SpectrAlert Advance Low Frequency Sounders and Sounder Strobes meet the new NFPA 72 2010/2013 low frequency requirements for certain new sleeping spaces. These devices were designed to easily integrate into the panel’s notification appliance circuit (NAC) line and provide audibility and tone requirements needed to awaken individuals. The SpectrAlert Advance universal mounting plate uses an onboard shorting spring, so installers can mount the plate and test wiring continuity before the device is installed. The low frequency sounder and sounder strobe devices are easily retrofitted into existing SpectrAlert Advance notification applications while also delivering greater flexibility for the new code requirements.

http://www.systemsensor.com/en-us/Pages/AV-LowFrequency.aspx


    Featured

    New Products

    • Compact IP Video Intercom

      Viking’s X-205 Series of intercoms provide HD IP video and two-way voice communication - all wrapped up in an attractive compact chassis.

    • HD2055 Modular Barricade

      Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation.

    • Camden CM-221 Series Switches

      Camden CM-221 Series Switches

      Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.