Skip to main content

Wausau

Window and Wall Systems Blast Hazard Mitigation Series

Window and Wall Systems Blast Hazard Mitigation Series

Wausau Window and Wall Systems Blast Hazard Mitigation (BHM) Series combines blast mitigation, energy performance and recycled content to meet government buildings’ high-security and green goals. BHM Series SuperWall Curtain Wall meets blast performance up to 33 psi peak pressure, 81 psi-msec impulse. The system accommodates cladding for steel tubes, which may be necessary to ensure structural performance in blast mitigating designs. SuperWall's screw-spline construction in multiple frame depths presents a uniform, three-inch exterior sightline. These products are designed for compliance with the GSA ISC and DoD UFC, and supported with an industry-leading warranty of up to 10 years.

Click here for more information.


    Featured

    Most   Popular

    New Products

    • new product

      Adams Rite 4300 Steel Hawk® Electrified Deadlatch

      Modernize aging storefront doors with a refined electrified deadlatch engineered to overcome sag, misalignment and heavy wear without replacing existing hardware.

    • GroundAware® GA1360LH 2D 360-Degree Radar

      Protect up to 750 acres with a single sensor, delivering extended 1 km+ target detection, all-weather tracking and automated intrusion deterrence for critical infrastructure.

    • HD2055 Modular Barricade

      Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation.