Fire, Explosion Evacuation Tips

  • Oct 02, 2007

The Department of Homeland Security and American Red Cross offer evacuation tips during a fire or after an explosion.

If There is an Explosion

  • Take shelter against your desk or a sturdy table.
  • Exit the building immediately.
  • Do not use elevators.
  • Check for fire and other hazards.
  • Take your emergency supply kit if time allows.

If There is a Fire

  • Exit the building immediately.
  • If there is smoke, crawl under the smoke to the nearest exit and use a cloth, if possible, to cover your nose and mouth.
  • Use the back of your hand to feel the upper, lower, and middle parts of closed doors.
  • If the door is not hot, brace yourself against it and open slowly.
  • If the door is hot, do not open it. Look for another way out.
  • Do not use elevators.
  • If your clothes catch on fire, stop-drop-and-roll to put out the fire. Do not run.
  • If you are at home, go to your previously designated outside meeting place.
  • Account for your family members and carefully supervise small children.
  • GET OUT and STAY OUT. Never go back into a burning building.
  • Call 9-1-1 or your local emergency number.

Featured

Most   Popular

New Products

  • Camden CV-7600 High Security Card Readers

    Camden CV-7600 High Security Card Readers

    Camden Door Controls has relaunched its CV-7600 card readers in response to growing market demand for a more secure alternative to standard proximity credentials that can be easily cloned. CV-7600 readers support MIFARE DESFire EV1 & EV2 encryption technology credentials, making them virtually clone-proof and highly secure.

  • Compact IP Video Intercom

    Viking’s X-205 Series of intercoms provide HD IP video and two-way voice communication - all wrapped up in an attractive compact chassis.

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.