Network Protection At An Overlooked Spot

How’s this for a nightmare scenario? Stealthy bad hats sneak up on an IP video camera attached to a remote fence and unplug it from its Ethernet cable. In its place, they jack in a laptop computer and -- voila! -- they’re now inside that surveillance network where they can manipulate other cameras, reprogram door locks, fiddle with access credentials and perhaps wreak havoc all over the target organization’s intranet.

Or maybe not. If that branch of the network is secured by a new appliance developed by Waterfall Solutions Ltd., a Tel Aviv-based startup, these intruders might find themselves staring at what amounts to a virtual wall situated just a few meters down the network. Waterfall claims its appliance, employing a clever combination of hardware and software, can isolate network segments in a way that’s completely impenetrable.
 
“I can give you full control -- password, administration rights, and more,” says Lior Frenkel, chief technology officer and co-founder of Waterfall. There’s no way through, he adds. “Standard firewalls and gateways are vulnerable to hacking or misconfiguration. Our appliance is not.”

Waterfall’s IP Surveillance Enabler exploits the fact that IP networks rely on a constant two-way flow of information. Data packets, containing images from a camera, for instance, flow one way. Traffic control signals -- short data bursts that acknowledge that the originating data packets have been received or, if not, request a resend--flow the other way. By blocking all of that downstream traffic control data and passing only upstream data packets, Waterfall’s box makes sure that any device located on the other side of the box will be unable to acknowledge packets sent to it by the intruders’ laptop. As a result, the laptop will be unable to engage with, much less manipulate, any device beyond the local network segment.

What stops hackers from receiving a single bit of downstream data? Within Waterfall’s box, inbound packets get turned into pulses of light, sent down a short piece of optical fiber, and then turned back into electronic pulses to continue their journey as usual. And it’s absolutely impossible, says Frenkel, for any data to travel the opposite direction across this electro-optical divide. Waterfall says it also has worked out methods, based on a proprietary protocol, to keep the camera none the wiser about its isolation from the broader network. The camera will still be addressable from the management system, remote polling and control will continue to work and managers can even upgrade the device, all with no sacrifice in security.

Frenkel declines to quote specific prices, but says the company’s goal is to make sure its device costs no more than 10 percent of the overall investment a customer is making in surveillance, including cameras, software and networking. For now, the Waterfall device will likely be deployed only to protect certain cameras and other devices that are remotely located and therefore particularly vulnerable to physical attack. Waterfall has begun shipments, has several pilot projects in the works, and has signed one customer, in Israel. Privately financed, the firm is now scrambling to make its product smaller and less costly to produce -- qualities that enabled once-costly and arcane network firewall products to take off a decade ago. Says Frenkel: “Today’s high-end solutions always become tomorrow’s common solutions.

About the Author

John W. Verity is a freelance writer based in South Orange, N.J.

Featured

New Products

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.

  • A8V MIND

    A8V MIND

    Hexagon’s Geosystems presents a portable version of its Accur8vision detection system. A rugged all-in-one solution, the A8V MIND (Mobile Intrusion Detection) is designed to provide flexible protection of critical outdoor infrastructure and objects. Hexagon’s Accur8vision is a volumetric detection system that employs LiDAR technology to safeguard entire areas. Whenever it detects movement in a specified zone, it automatically differentiates a threat from a nonthreat, and immediately notifies security staff if necessary. Person detection is carried out within a radius of 80 meters from this device. Connected remotely via a portable computer device, it enables remote surveillance and does not depend on security staff patrolling the area.

  • Luma x20

    Luma x20

    Snap One has announced its popular Luma x20 family of surveillance products now offers even greater security and privacy for home and business owners across the globe by giving them full control over integrators’ system access to view live and recorded video. According to Snap One Product Manager Derek Webb, the new “customer handoff” feature provides enhanced user control after initial installation, allowing the owners to have total privacy while also making it easy to reinstate integrator access when maintenance or assistance is required. This new feature is now available to all Luma x20 users globally. “The Luma x20 family of surveillance solutions provides excellent image and audio capture, and with the new customer handoff feature, it now offers absolute privacy for camera feeds and recordings,” Webb said. “With notifications and integrator access controlled through the powerful OvrC remote system management platform, it’s easy for integrators to give their clients full control of their footage and then to get temporary access from the client for any troubleshooting needs.”