CFATS Professionals: Slow-Moving Approval Process No Reason To Rest

Three professionals who help chemical facilities meet security responsibilities note that facility officials need to ensure that they can deliver on their site plan promises.

Chemical facilities that have submitted their site security plans (SSPs) really don't have time to relax despite the fact that the Department of Homeland Security has only been able to authorize three of the more than 3,669 submissions it has received as of Oct. 1.

SSPs are required for high-risk facilities through the Chemical Facility Anti-Terrorism Standards and a presentation on this subject was given by Michael Saad, CPP, senior director of consulting services at Huffmaster Crisis Response LLC; Wade Pinnell, CPP, vice president, Huffmaster Companies; and Evan Wolff, director, Homeland Security Practice Resources Regulatory and Environmental Law, Hunton and Williams, during ASIS 2010 in Dallas.
 
Pinnel, who has attended seven pre-authorization inspections, urged facility managers to review their plans as an inspector would.

"You need to check to see if what you told DHS you were going to do is actually in place," he said.

Pinnel also stressed that inspectors will be interviewing not only uniformed security officers, but also receptionists and anyone else who is assigned to implement security policy and procedure.

From his experience, Pinnel said that "we all submitted far too little information. Can inspectors visualize what we are doing in our facilities?"

If they can't, the security plan probably needs some work, including screening site visitors, searching vehicles, and preparing staff to take on their security roles.

Pinnel cautioned against letting technology drive security solutions.

"We need to integrate with the individuals performing the security roles," he said.

Saad took that tact a step further, urging security managers to develop relationships with law enforcement.

"Bring them to your facilities, show how you do what you do, provide site drawings and then re-engage them during training," he said.

An important aspect of planning is communicating the plan. Saad explained that planned security measures must be written into company policy and procedures. There also should be written protocols for security incident reporting, security incident investigation, training, drills, and exercises.

The key ingredients for success, Saad said, hinge on executive commitment to the programs (there is no ROI, we must comply) and a good project manager. Without someone dedicated to developing and implementing facility security under CFATS, deadlines may be missed, he noted. Realistic timelines are essential and, if those are not kept, managers must document why to discover gaps and provide information to DHS, he added.
 
From an attorney's perspective, Wolff encouraged managers to have their companies develop a corporate policy on security, a security compliance policy that establishes clear leadership and management, and a corporate inspection process.

"DHS has broad inspection authority," he said, adding that adjudication is based on the records a facility creates.

 

About the Author

L.K. Williams is the editor of Environmental Protection online.

Featured

Featured Cybersecurity

Webinars

New Products

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings. 3

  • A8V MIND

    A8V MIND

    Hexagon’s Geosystems presents a portable version of its Accur8vision detection system. A rugged all-in-one solution, the A8V MIND (Mobile Intrusion Detection) is designed to provide flexible protection of critical outdoor infrastructure and objects. Hexagon’s Accur8vision is a volumetric detection system that employs LiDAR technology to safeguard entire areas. Whenever it detects movement in a specified zone, it automatically differentiates a threat from a nonthreat, and immediately notifies security staff if necessary. Person detection is carried out within a radius of 80 meters from this device. Connected remotely via a portable computer device, it enables remote surveillance and does not depend on security staff patrolling the area. 3

  • Compact IP Video Intercom

    Viking’s X-205 Series of intercoms provide HD IP video and two-way voice communication - all wrapped up in an attractive compact chassis. 3