Ameristar Receives SAFETY Act Certification from DHS

Ameristar Fence Products announced recently that the U.S. Department of Homeland Security has Designated and Certified the company’s Impasse High Security Pale Fence and Stalwart Anti-Ram Pas¬sive Cable Barrier systems under the Support Anti-terrorism by Fostering Effective Technology Act of 2002 (the SAFETY Act).

The certification places Ameristar’s Impasse palisade fencing and their Stalwart family of anti-ram cabled barriers on the “Approved Product list for Homeland Security.”

Certification is the highest level of liability protection available under the SAFETY Act.

After an extensive review of its Impasse and Stalwart product lines, Ameristar has been granted coverage under the federal law known as the “Support Anti-terrorism by Fostering Effective Technology Act” (the “SAFETY Act”). This rep¬resents the first and only such Designation and Certification for a high security fence and passive vehicle barrier manufac¬turer.

The lawsuit protections that SAFETY Act coverage affords will result in significantly lower liability exposure for Ameris¬tar and its customers should a future act of terrorism occur.

This is a tremendous benefit to Ameristar, contractors that install the products, security integrators, architects and engineers that specify the products, and the end use customers that use the qualified physical security products on their facilities since they will also benefit from the liability protection afforded by the act.

The SAFETY Act essentially eliminates liability that could arise out of a terrorist attack for sellers whose anti-terror products have been reviewed and approved by the DHS in America’s fight against terrorism. Most important, these lawsuit protections extend to Ameristar’s customers should a future act of terrorism occur and lawsuits follow alleging that Ameri¬star’s physical security products failed to prevent the terrorism.

Should this happen, Ameristar’s customers’ liability would be strictly limited, if not nonexistent, in most cases because they purchased Ameristar’s SAFETY Act approved services.

This may also create an opportunity for Ameristar’s customers to recognize lower insurance premiums given the elimination of risk of lawsuits should an act of terrorism occur.

“We are extremely excited and very proud of this significant achievement because of the fact that our products are now formally recognized by the U.S. Department of Homeland Security as proven to be effective in the fight against terror¬ism,” said Chris L. Herold, market manger and author of Ameristar’s SAFETY Act application.

Featured

New Products

  • PE80 Series

    PE80 Series by SARGENT / ED4000/PED5000 Series by Corbin Russwin

    ASSA ABLOY, a global leader in access solutions, has announced the launch of two next generation exit devices from long-standing leaders in the premium exit device market: the PE80 Series by SARGENT and the PED4000/PED5000 Series by Corbin Russwin. These new exit devices boast industry-first features that are specifically designed to provide enhanced safety, security and convenience, setting new standards for exit solutions. The SARGENT PE80 and Corbin Russwin PED4000/PED5000 Series exit devices are engineered to meet the ever-evolving needs of modern buildings. Featuring the high strength, security and durability that ASSA ABLOY is known for, the new exit devices deliver several innovative, industry-first features in addition to elegant design finishes for every opening.

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.

  • ResponderLink

    ResponderLink

    Shooter Detection Systems (SDS), an Alarm.com company and a global leader in gunshot detection solutions, has introduced ResponderLink, a groundbreaking new 911 notification service for gunshot events. ResponderLink completes the circle from detection to 911 notification to first responder awareness, giving law enforcement enhanced situational intelligence they urgently need to save lives. Integrating SDS’s proven gunshot detection system with Noonlight’s SendPolice platform, ResponderLink is the first solution to automatically deliver real-time gunshot detection data to 911 call centers and first responders. When shots are detected, the 911 dispatching center, also known as the Public Safety Answering Point or PSAP, is contacted based on the gunfire location, enabling faster initiation of life-saving emergency protocols.