Here's the Know-How

Providing real-time information to building occupants

The term mass notification originated with the Unified Facilities Criteria (UFC) document 4-021-01, titled Design and O&M: Mass Notification Systems, created by the Department of Defense (DoD). The UFC outlines the design, operation and maintenance of mass notification systems (MNSs) required on all DoD properties, including posts for the Air Force, Army, Marine Corps and Navy.

The UFC defines mass notification as “the capability to provide real-time information to all building occupants or personnel in the immediate vicinity of a building during emergency situations. To reduce the risk of mass casualties, there must be a timely means to notify building occupants of threats and what should be done in response to those threats. Pre-recorded and live-voice emergency messages are required by this UFC to provide this capability.”

The UFC recommends the use of a combined fire alarm and mass notification system, particularly in new construction of military facilities, where the building fire alarm control panel forms a single combined system that performs both functions. For smaller buildings, the public address system may also integrate with this combined system, provided the PA system can be supervised for integrity.

Codes and Components
Initially seen as a solution for the military, MNSs are gaining popularity outside the armed forces. The 2010 edition of NFPA 72: National Fire Alarm & Signaling Code’s lengthy Chapter 24 outlines requirements for the design and installation of emergency communication systems within commercial facilities. While recent events such as the Virginia Tech campus shootings and severe weather incidents have raised demand for emergency communication systems for commercial properties, the new NFPA codes have begun to set a precedent of using fire alarm systems to support the added duties of a supervised and more survivable ECS.

So that MNSs serve as more than a common fire alarm voice evacuation system, NFPA 72 requires that “security personnel should be able to effect message initiation over the MNS from either a central control station or alternate (backup) control station. Where clusters of facilities exist, one or more regional control stations might also exercise control.” It also requires the MNS to offer a “dynamic library of scripted responses to various emergency events that would be easily customizable to meet the needs of the individual customer.”

To service this need, distributed messaging units, commonly referred to as local operator consoles (LOCs), are typically tied to the fire alarm/ECS network and installed throughout a facility or campus to provide authorized users a means systems such as e-mail or reverse-911 systems offer alternative methods for alerting occupants. However, these technologies are not supervised for faults or breaks, nor do they encompass a more “survivable” design that would enable the ongoing delivery of accurate communications even if one or more parts of the system’s network were down. Likewise, there are no codes or standards in existence that require these systems to be regularly tested and maintained to a specific level of performance.

NFPA 72 makes clear that distributed recipient notification systems such as text messaging or e-mail shall not be used in lieu of required audible and visual alerting emergency communication systems. This is due to the possibility of delivering conflicting information such as a text message directing a person to remain in place while the fire alarm system in the building provides the evacuation message. If the fire alarm evacuation system is activated before the occupants receive the message, there could be confusion.

For the same reason, NFPA 72 requires that a building’s fire alarm and emergency communication systems be integrated and programmed to allow all ECS functions to supersede the fire alarm. This priority setting avoids the situation of a fire alarm evacuating a building while a message to “shelter in place” is sent through the same facility’s ECS.

Today, a layered approach using a fire alarm/ECS and an integrated distributed recipient notification system is considered the best solution for reaching the largest number of occupants. However, the sequence of notifications -- from all systems -- must be considered, and any potential delays in the transmission of communications must be minimized.

For these reasons, all systems should be integrated and coordinated with a facility’s emergency plan.

In the middle of an emergency, flashing strobes accompanied by live or pre-recorded audible instructions tend to have a much higher effect on occupants.

At the same time, highly visual signs in large areas of assembly can offer information specific to the emergency or display a simple message such as “evacuate.” To deliver voice instructions to those outside, large speaker clusters can be installed on the exterior of a building or throughout a campus.

Using a combination of audible and visual notification devices, such as strobes, voice communications (indoor speakers and outdoor Giant Voice variety speakers) and programmable LED signage is considered the most intrusive solution for capturing the attention of occupants and delivering a clear, audible message.

For multiple buildings or campuses spread across a city, state or even the globe, some fire alarm manufacturers such as NOTIFIER have harnessed VoIP technology to deliver live voice messages to anywhere in the world via the Internet. These state-of-the-art systems include one or more workstations from which security or facilities personnel can send emergency communications via VoIP.

Fire alarm system manufacturers and installers work within a tightly regulated industry, which was the first to create requirements for the design and installation of ECS for commercial properties. The marriage of ECS and fire alarm control systems is a growing trend that is expected to continue reaching into larger varieties of facilities and multi-building properties, including K-12 schools, high-rise buildings, mass transit hubs and even public gathering places such as theaters, restaurants and places of worship.

This article originally appeared in the September 2011 issue of Security Today.

Featured

  • Security Industry Association Announces the 2026 Security Megatrends

    The Security Industry Association (SIA) has identified and forecasted the 2026 Security Megatrends, which form the basis of SIA’s signature annual Security Megatrends report defining the top 10 factors influencing both near- and long-term change in the global security industry. Read Now

  • The Future of Access Control: Cloud-Based Solutions for Safer Workplaces

    Access controls have revolutionized the way we protect our people, assets and operations. Gone are the days of cumbersome keychains and the security liabilities they introduced, but it’s a mistake to think that their evolution has reached its peak. Read Now

  • A Look at AI

    Large language models (LLMs) have taken the world by storm. Within months of OpenAI launching its AI chatbot, ChatGPT, it amassed more than 100 million users, making it the fastest-growing consumer application in history. Read Now

  • First, Do No Harm: Responsibly Applying Artificial Intelligence

    It was 2022 when early LLMs (Large Language Models) brought the term “AI” into mainstream public consciousness and since then, we’ve seen security corporations and integrators attempt to develop their solutions and sales pitches around the biggest tech boom of the 21st century. However, not all “artificial intelligence” is equally suitable for security applications, and it’s essential for end users to remain vigilant in understanding how their solutions are utilizing AI. Read Now

  • Improve Incident Response With Intelligent Cloud Video Surveillance

    Video surveillance is a vital part of business security, helping institutions protect against everyday threats for increased employee, customer, and student safety. However, many outdated surveillance solutions lack the ability to offer immediate insights into critical incidents. This slows down investigations and limits how effectively teams can respond to situations, creating greater risks for the organization. Read Now

New Products

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.

  • Mobile Safe Shield

    Mobile Safe Shield

    SafeWood Designs, Inc., a manufacturer of patented bullet resistant products, is excited to announce the launch of the Mobile Safe Shield. The Mobile Safe Shield is a moveable bullet resistant shield that provides protection in the event of an assailant and supplies cover in the event of an active shooter. With a heavy-duty steel frame, quality castor wheels, and bullet resistant core, the Mobile Safe Shield is a perfect addition to any guard station, security desks, courthouses, police stations, schools, office spaces and more. The Mobile Safe Shield is incredibly customizable. Bullet resistant materials are available in UL 752 Levels 1 through 8 and include glass, white board, tack board, veneer, and plastic laminate. Flexibility in bullet resistant materials allows for the Mobile Safe Shield to blend more with current interior décor for a seamless design aesthetic. Optional custom paint colors are also available for the steel frame.

  • HD2055 Modular Barricade

    Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation.