3D Printed Guns Topic of Bulletin from Homeland Security to Law Enforcement

3D Printed Guns Topic of Bulletin from Homeland Security to Law Enforcement

  • May 24, 2013

Well, looks like 3D printed guns are making the headlines again. This time, even the Department of Homeland Security seems hopeless when it comes to preventing 3D printed guns from being made, not to mention making it past security checkpoints. The department fears that 3D printed gun control efforts will be useless should their manufacture become more widespread, making it “impossible” to stop or even control.

A couple of days ago, a department-distributed bulletin arrived at state and federal law enforcement agencies, stating that 3D printed guns “poses public safety risks” and are likely beyond the current reach of regulators and regulations.

According to one law enforcement source, “The only security procedure to catch [3D printed guns] is a pat down,” since magnetometers could fail to detect them.

3D Printed Guns Topic of Bulletin from Homeland Security to Law EnforcementThe bulletin specifically honed in on a nonprofit company, Defense Distributed, started by University of Texas law student, Cody Wilson, who has not only successfully printed a 3D gun, which he nicknamed “The Liberator,” but fired it as well. And, of course, Wilson felt the need to share, so plans for how to make “The Liberator” were available for free download, until the U.S. State Department told the organization to stop sharing the file, but only after the plans were downloaded approximately 100,000 times.

Containing phrases like “poses public safety risks” and “limiting access may be impossible,” neither of which sound too confident, the bulletin mentions the following concerns:

  • Though prohibited by law, the metal insert may be deliberately omitted;
  • Future designs could entirely eliminate metal components;
  • 3D guns can be made without serial numbers, which hinders ballistic testing; and
  • Improvements in technology leading to cheaper 3D printers could make printed guns easier to acquire.

Plus, even if there is legislation in place that bans 3D printed guns, online distribution of digital files is difficult to control. Think about illegally traded music, movies and software.

So, my fellow Americans, I pose this question: “are we ready for pat downs?”

Source: http://www.foxnews.com/us/2013/05/23/govt-memo-warns-3d-printed-guns-may-be-impossible-to-stop/

Featured

  • Maximizing Your Security Budget This Year

    7 Ways You Can Secure a High-Traffic Commercial Security Gate  

    Your commercial security gate is one of your most powerful tools to keep thieves off your property. Without a security gate, your commercial perimeter security plan is all for nothing. Read Now

  • Protecting Data is Critical

    To say that the Internet of Things (IoT) has become a part of everyday life would be a dramatic understatement. At this point, you would be hard-pressed to find an electronic device that is not connected to the internet. Read Now

  • Mobile Access Adoption

    Smartphones and other mobile devices have had a profound impact on how the world securely accesses the workplace and its services. The growing adoption of mobile wallets and the new generation of users is compounding this effect. Read Now

  • Changing Mindsets

    We have come a long way from the early days of fuzzy analog CCTV systems. During that time, we have had to migrate from analog to digital signals. When IP-based network cameras arrived, they opened a new world of quality and connectivity but also introduced plenty of challenges. Thankfully, network devices today have become smart enough to discover themselves and even self-configure to some degree. While some IT expertise is certainly required, things are much smoother these days. The biggest change is in how fast security cameras and supporting infrastructure are evolving. Read Now

Most   Popular

Featured Cybersecurity

Webinars

New Products

  • HD2055 Modular Barricade

    Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation. 3

  • ResponderLink

    ResponderLink

    Shooter Detection Systems (SDS), an Alarm.com company and a global leader in gunshot detection solutions, has introduced ResponderLink, a groundbreaking new 911 notification service for gunshot events. ResponderLink completes the circle from detection to 911 notification to first responder awareness, giving law enforcement enhanced situational intelligence they urgently need to save lives. Integrating SDS’s proven gunshot detection system with Noonlight’s SendPolice platform, ResponderLink is the first solution to automatically deliver real-time gunshot detection data to 911 call centers and first responders. When shots are detected, the 911 dispatching center, also known as the Public Safety Answering Point or PSAP, is contacted based on the gunfire location, enabling faster initiation of life-saving emergency protocols. 3

  • Compact IP Video Intercom

    Viking’s X-205 Series of intercoms provide HD IP video and two-way voice communication - all wrapped up in an attractive compact chassis. 3