12 Months Remaining Until Full REAL ID Enforcement Deadline

12 Months Remaining Until Full REAL ID Enforcement Deadline

DHS enforcing critical identification requirements to protect the homeland

The Department of Homeland Security (DHS) is reminding Americans that only 12 months remain until the Oct. 1, 2021, REAL ID enforcement goes into effect. On Oct. 1, 2021, persons seeking to enter federal facilities, nuclear power plants or commercial airplanes at federally regulated airports will be required to have a REAL ID compliant license or acceptable alternative identification, such as a U.S. passport or passport card, to gain entry. DHS continues to urge Americans to obtain a REAL ID-compliant card or acceptable alternative well before this deadline.

All 50 states, the District of Columbia, Puerto Rico, the U.S Virgin Islands and Guam are fully compliant and are issuing these cards. To date, the states and territories have issued approximately 110 million REAL ID-compliant driver’s licenses and identification cards, representing 40 percent of all driver licenses and identification card holders.

Having improved credentials is critical to the security of our homeland as evidenced by the bipartisan 9/11 Commission, which discovered that terrorists easily procured driver licenses. The 19 terrorists who attacked our country on 9/11 acquired more than 30 driver licenses and identification cards, which helped the terrorists conduct critical aspects of their plot, such as renting cars and boarding flights.

Passed by Congress in 2005 following a 9/11 Commission recommendation, the REAL ID Act and regulations establish minimum security standards for state-issued driver’s licenses and identification cards and prohibits federal agencies, like the Transportation Security Administration, from accepting licenses and identification cards for official purposes from states that do not meet these anti-counterfeiting and anti-fraud standards after specific deadlines.

To avoid confusion regarding the REAL ID Act requirements and enforcement milestones, residents can use the following guidelines to be fully informed and prepared.

Check your state-issued driver license or identification card for the star. REAL ID-compliant cards have a star marking in the upper left- or right-hand corner. Most acceptable alternatives, such as state-issued Enhanced Driver Licenses (EDLs), which are available in five states and can be used for entering the United States at land and sea border crossings, do not have the star, but are acceptable for official REAL ID purposes. For more information on EDLs, please go to www.dhs.gov/enhanced-drivers-licenses-what-are-they.

Bring identity documents to the airport that are acceptable for flying domestically. Check to see if you have the proper identification to fly at tsa.gov/travel/security-screening/identification. TSA’s website has a list of acceptable forms of identification that individuals may use to verify their identity at the screening checkpoint. If you need to obtain a new form of ID, please allow sufficient processing time before you travel. For example, the current processing times for U.S. passports are approximately 10 weeks for routine service and two to three weeks for expedited service.

Check in advance with the federal agency you plan to visit to find out whether identification is required, and if so, what types of identity documents are acceptable. While most federal agencies will continue to accept non-compliant driver’s licenses and identification cards until the enforcement deadline of Oct. 1, 2021, some – like Department of Defense facilities and posts – may no longer accept them.

Read answers to REAL ID frequently asked questions at www.dhs.gov/real-id-public-faqs.

Featured

  • Maximizing Your Security Budget This Year

    7 Ways You Can Secure a High-Traffic Commercial Security Gate  

    Your commercial security gate is one of your most powerful tools to keep thieves off your property. Without a security gate, your commercial perimeter security plan is all for nothing. Read Now

  • Protecting Data is Critical

    To say that the Internet of Things (IoT) has become a part of everyday life would be a dramatic understatement. At this point, you would be hard-pressed to find an electronic device that is not connected to the internet. Read Now

  • Mobile Access Adoption

    Smartphones and other mobile devices have had a profound impact on how the world securely accesses the workplace and its services. The growing adoption of mobile wallets and the new generation of users is compounding this effect. Read Now

  • Changing Mindsets

    We have come a long way from the early days of fuzzy analog CCTV systems. During that time, we have had to migrate from analog to digital signals. When IP-based network cameras arrived, they opened a new world of quality and connectivity but also introduced plenty of challenges. Thankfully, network devices today have become smart enough to discover themselves and even self-configure to some degree. While some IT expertise is certainly required, things are much smoother these days. The biggest change is in how fast security cameras and supporting infrastructure are evolving. Read Now

Featured Cybersecurity

Webinars

New Products

  • PE80 Series

    PE80 Series by SARGENT / ED4000/PED5000 Series by Corbin Russwin

    ASSA ABLOY, a global leader in access solutions, has announced the launch of two next generation exit devices from long-standing leaders in the premium exit device market: the PE80 Series by SARGENT and the PED4000/PED5000 Series by Corbin Russwin. These new exit devices boast industry-first features that are specifically designed to provide enhanced safety, security and convenience, setting new standards for exit solutions. The SARGENT PE80 and Corbin Russwin PED4000/PED5000 Series exit devices are engineered to meet the ever-evolving needs of modern buildings. Featuring the high strength, security and durability that ASSA ABLOY is known for, the new exit devices deliver several innovative, industry-first features in addition to elegant design finishes for every opening. 3

  • Unified VMS

    AxxonSoft introduces version 2.0 of the Axxon One VMS. The new release features integrations with various physical security systems, making Axxon One a unified VMS. Other enhancements include new AI video analytics and intelligent search functions, hardened cybersecurity, usability and performance improvements, and expanded cloud capabilities 3

  • FEP GameChanger

    FEP GameChanger

    Paige Datacom Solutions Introduces Important and Innovative Cabling Products GameChanger Cable, a proven and patented solution that significantly exceeds the reach of traditional category cable will now have a FEP/FEP construction. 3