Tips: Prevent Holiday Fires

  • Dec 06, 2010
 While it may seem Scrooge-like to think about fire hazards during the holidays, many of the activities people engage in -- cooking, entertaining, and decorating -- all present increased fire risks. According to the National Fire Protection Association (NFPA), candles and Christmas trees play a role in these incidents.

Fortunately, the vast majority of holiday fires are preventable, notes Lorraine Carli, NFPA’s vice president of communications.

“Certainly, no one needs to abandon their holiday traditions and activities,” Carli said. “But by understanding where potential hazards exist, and making some minor adjustments, people can greatly increase their homes’ and loved ones’ safety, and enjoy the season as planned.”

NFPA offers the following information and advice to ensure a festive and safe holiday season:

Cooking: Cooking equipment fires are the leading cause of U.S. home fires and fire injuries, and the third leading cause of home fire deaths. In 2008, relative to an average day, the number of home cooking equipment fires was 55 percent higher on Christmas Eve and 68 percent higher on Christmas Day.

  • Stay in the kitchen while you’re frying, grilling, or broiling food.
  • Most cooking fires involve the stovetop. Keep anything that can catch fire away from it, and turn off the stove when you leave the kitchen, even if it’s for a short period of time.
  • If you’re simmering, boiling, baking, or roasting food, check it regularly and use a timer to remind you that you’re cooking.
  • For homes with children, create a “kid-free zone” of at least three feet around the stove and areas where hot food and drinks are prepared or carried.

Christmas trees: U.S. fire departments annually respond to roughly 260 home structure fires that began with Christmas trees. One third of them are caused by electrical problems, and one in five resulted from a heat source that’s too close to the tree.

  • If you have an artificial tree, be sure it’s labeled, certified or identified by the manufacturer as fire-retardant.
  • If you choose a fresh tree, make sure the green needles don’t fall off when touched; before placing it in the stand, cut 1-2 inches from the base of the trunk. Add water to the tree stand, and be sure to water it daily.
  • Make sure the tree is not blocking an exit, and is at least three feet away from any heat source, like fireplaces, radiators, candles, and heat vents or lights.
  • Use lights that have the label of an independent testing laboratory, and make sure you know whether they are designed for indoor or outdoor use.
  • Replace any string of lights with worn or broken cords, or loose bulb connections. Connect no more than three strands of mini-string sets and a maximum of 50 bulbs for screw-in bulbs.
  • Never use lit candles to decorate the tree. Read the manufacturer’s instructions for the number of LED strands to connect.
  • Always turn off Christmas tree lights before leaving the room or going to bed.
  • After Christmas, get rid of the tree. Dried-out trees are a fire hazard and should not be left in the home or garage, or placed outside the home.
  • Bring outdoor electrical lights inside after the holidays to prevent hazards and make them last longer.

Candles: December is the peak month for home candle fires, with Christmas Eve and Christmas Day representing two of the five top days for associated fires. NFPA statistics show that more than half of all candle fires start when placing them too close to things that can burn.

  • Consider using flameless candles, which look and smell like real candles. If you do use traditional candles, keep them at least 12 inches away from anything that can burn, and remember to blow them out when you leave the room or go to bed.
  • Use candle holders that are sturdy, won’t tip over, and are placed on uncluttered surfaces.
  • Avoid using candles in the bedroom where two of five U.S. candle fires begin or other areas where people may fall asleep.
  • Never leave a child alone in a room with a burning candle.

For additional resources and information about holiday fire safety, including audio clips, videos, and safety sheets, visit NFPA’s website at www.nfpa.org/holiday.

Featured

  • The Evolution of IP Camera Intelligence

    As the 30th anniversary of the IP camera approaches in 2026, it is worth reflecting on how far we have come. The first network camera, launched in 1996, delivered one frame every 17 seconds—not impressive by today’s standards, but groundbreaking at the time. It did something that no analog system could: transmit video over a standard IP network. Read Now

  • From Surveillance to Intelligence

    Years ago, it would have been significantly more expensive to run an analytic like that — requiring a custom-built solution with burdensome infrastructure demands — but modern edge devices have made it accessible to everyone. It also saves time, which is a critical factor if a missing child is involved. Video compression technology has played a critical role as well. Over the years, significant advancements have been made in video coding standards — including H.263, MPEG formats, and H.264—alongside compression optimization technologies developed by IP video manufacturers to improve efficiency without sacrificing quality. The open-source AV1 codec developed by the Alliance for Open Media—a consortium including Google, Netflix, Microsoft, Amazon and others — is already the preferred decoder for cloud-based applications, and is quickly becoming the standard for video compression of all types. Read Now

  • Cost: Reactive vs. Proactive Security

    Security breaches often happen despite the availability of tools to prevent them. To combat this problem, the industry is shifting from reactive correction to proactive protection. This article will examine why so many security leaders have realized they must “lead before the breach” – not after. Read Now

  • Achieving Clear Audio

    In today’s ever-changing world of security and risk management, effective communication via an intercom and door entry communication system is a critical communication tool to keep a facility’s staff, visitors and vendors safe. Read Now

  • Beyond Apps: Access Control for Today’s Residents

    The modern resident lives in an app-saturated world. From banking to grocery delivery, fitness tracking to ridesharing, nearly every service demands another download. But when it comes to accessing the place you live, most people do not want to clutter their phone with yet another app, especially if its only purpose is to open a door. Read Now

Most   Popular

New Products

  • A8V MIND

    A8V MIND

    Hexagon’s Geosystems presents a portable version of its Accur8vision detection system. A rugged all-in-one solution, the A8V MIND (Mobile Intrusion Detection) is designed to provide flexible protection of critical outdoor infrastructure and objects. Hexagon’s Accur8vision is a volumetric detection system that employs LiDAR technology to safeguard entire areas. Whenever it detects movement in a specified zone, it automatically differentiates a threat from a nonthreat, and immediately notifies security staff if necessary. Person detection is carried out within a radius of 80 meters from this device. Connected remotely via a portable computer device, it enables remote surveillance and does not depend on security staff patrolling the area.

  • HD2055 Modular Barricade

    Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation.

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.