southwest plane

Perimeter Security in Question At Texas Airport After Man's Death

Man on Austin runway killed as Southwest Airlines plane lands.

Security at the perimeter of the Austin, Tex. airport has come under fire following the death of a man who was struck by a Southwest Airlines airplane landing at that airport. Airport officials have confirmed that the man who was struck by the airplane did not have an airport badge (credentials) and was unauthorized to be on the secure side of the facility.

The victim has been identified as 22-year-old Junin Ko.

As federal investigators search for answers, a former National Transportation Safety Board member, who has about 60 years of experience in the aviation industry said the situation is “a little bit embarrassing.”

“… Maybe a major embarrassment for the airport itself. It's a great concern for the security people in the airport,” said John Goglia, a former National Transportation Safety Board (NTSB) member.

Security at the Austin airport is maintained by the city’s Department of Aviation, the Austin Police Department, TSA and all employees who work at the airport. An airport spokesperson said airport staff “have been and will continue to be in compliance with out TSA-approved Airport Security Program.”

According to the Federal Aviation Administration (FAA), Southwest Airlines flight 1392 landed in Austin from Dallas at 8:12 p.m. on Thursday. The pilot reported seeing a person on the runway to air traffic control while landing at the airport, but but in those final seconds of landing, Goglia said a maneuver likely couldn’t have made much of a difference. Southwest Airlines quickly responded with a statement following the tragedy.

“Southwest flight #1392 arrived safely, (carrying 53 passengers and five crew members) after being cleared to land on runway 17R at Austin-Bergstrom International Airport (AUS) this evening. The Southwest aircraft maneuvered to avoid an individual who appeared on runway 17R shortly after touchdown. The aircraft quickly came to a safe stop, and the Pilots reported the event to local air traffic controllers. After receiving further instructions from controllers, the aircraft taxied to the gate where all Customers and the Crew deplaned the aircraft safely with no reports of onboard injuries. Tonight's flight landed at 8:12 p.m. CDT, after arriving from Dallas Love Field (DAL).

"Southwest is fully cooperating with local law enforcement and FAA as they investigate this event. Our Southwest Hearts extend to the individual involved, and we sincerely thank our crew for their professionalism and swift response.”

An airport operations employee found the victim minutes later, before medics responded and the man was pronounced dead.

“It's the most busy time of the landing,” Goglia said, “and if it's anywhere near nighttime, the visibility on the runway is grossly reduced.”

It was the first time something like this has happened at Austin’s airport in its 21 years. The FAA said it’s so rare that it’s not something the agency tracks.

“Something happened here that allowed this guy to get in, whether it was a lapse from the people who designed the system or a lapse with the equipment. But in any event, this individual got into an area that he should not have been,” Goglia said.

“When he's that close to touchdown, he's committed. He's touching down. So, it doesn't matter what mysteriously shows up in front of him. It's too late,” Goglia said.

The NTSB was notified of the incident but delegated investigative authority to the Austin Police Department, which is leading the investigation with help from the FAA and the Austin airport.

About the Author

Ralph C. Jensen is the Publisher/Editor in chief of Security Today magazine.

Featured

  • UL Solutions Launches Artificial Intelligence Safety Certification Services

    UL Solutions Inc., a global leader in safety science, today announced the launch of artificial intelligence (AI) safety certification services, enabling comprehensive assessments for evaluating the safety of AI-powered products. Read Now

  • ESA Announces Initiative to Introduce the SECURE Act in State Legislatures

    The Electronic Security Association (ESA), the national voice for the electronic security and life safety industry, has announced plans to introduce the SECURE Act in state legislatures across the country beginning in 2025. The proposal, known as Safeguarding Election Candidates Using Reasonable Expenditures, provides a clear framework that allows candidates and elected officials to use campaign funds for professional security services. Read Now

    • Guard Services
  • Ransomware Attacks Rise for the First Time in Six Months

    Ransomware attacks have risen for the first time in six months, increasing by 28% month-on-month to 421 attacks. While overall attack volume remained below 500, the uptick may signal a renewed escalation heading into the year’s most active period for cyber criminals. Read Now

  • Report: 47 Percent of Security Service Providers Are Not Yet Using AI or Automation Tools

    Trackforce, a provider of security workforce management platforms, today announced the launch of its 2025 Physical Security Operations Benchmark Report, an industry-first study that benchmarks both private security service providers and corporate security teams side by side. Based on a survey of over 300 security professionals across the globe, the report provides a comprehensive look at the state of physical security operations. Read Now

    • Guard Services
  • Identity Governance at the Crossroads of Complexity and Scale

    Modern enterprises are grappling with an increasing number of identities, both human and machine, across an ever-growing number of systems. They must also deal with increased operational demands, including faster onboarding, more scalable models, and tighter security enforcement. Navigating these ever-growing challenges with speed and accuracy requires a new approach to identity governance that is built for the future enterprise. Read Now

New Products

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.

  • Mobile Safe Shield

    Mobile Safe Shield

    SafeWood Designs, Inc., a manufacturer of patented bullet resistant products, is excited to announce the launch of the Mobile Safe Shield. The Mobile Safe Shield is a moveable bullet resistant shield that provides protection in the event of an assailant and supplies cover in the event of an active shooter. With a heavy-duty steel frame, quality castor wheels, and bullet resistant core, the Mobile Safe Shield is a perfect addition to any guard station, security desks, courthouses, police stations, schools, office spaces and more. The Mobile Safe Shield is incredibly customizable. Bullet resistant materials are available in UL 752 Levels 1 through 8 and include glass, white board, tack board, veneer, and plastic laminate. Flexibility in bullet resistant materials allows for the Mobile Safe Shield to blend more with current interior décor for a seamless design aesthetic. Optional custom paint colors are also available for the steel frame.

  • Luma x20

    Luma x20

    Snap One has announced its popular Luma x20 family of surveillance products now offers even greater security and privacy for home and business owners across the globe by giving them full control over integrators’ system access to view live and recorded video. According to Snap One Product Manager Derek Webb, the new “customer handoff” feature provides enhanced user control after initial installation, allowing the owners to have total privacy while also making it easy to reinstate integrator access when maintenance or assistance is required. This new feature is now available to all Luma x20 users globally. “The Luma x20 family of surveillance solutions provides excellent image and audio capture, and with the new customer handoff feature, it now offers absolute privacy for camera feeds and recordings,” Webb said. “With notifications and integrator access controlled through the powerful OvrC remote system management platform, it’s easy for integrators to give their clients full control of their footage and then to get temporary access from the client for any troubleshooting needs.”