Reducing Nuisance Alarms

Even a low rate of alarm can lead to complacency

Critical infrastructure sites need reliable, cost-effective physical security solutions. For these solutions to be a success they must reliably detect and deter would-be intruders, enhance intrusion assessment and response capabilities, secure remote and unmanned sites, and, finally, address one of the most prevalent issues with physical security, reduce nuisance alarms.

Nuisance Alarms Lead to Complacency
Nuisance alarms are alarms that are generated when the site's security system is functioning correctly but is being triggered by non-threat stimuli, which may include wind or other severe weather, nearby human or animal activity, or wind-induced vegetation movement.

For operators, even a relatively low nuisance alarm rate (NAR) can lead to problems such as complacency–ignoring real alarms because it is assumed they are false–and increased costs for ongoing repair and maintenance.
Security Starts at the Perimeter: Fence Sensors and Video Analytics
Adding a perimeter intrusion detection system (PIDS), such as a fence-mounted sensor, augments the effectiveness of an existing fence by providing valuable capabilities to detect and locate attempts to cut, climb or lift the fence.

Connected to the site's alarm systems, PIDS can notify off-site security personnel of the intrusion and engage automated deterrent mechanisms such as the strobing of lights at the fence line, increased illumination of the overall site or using public address systems to provide audible warnings.

Video Analytic Solutions
Intrusion attempts can also be detected via video analytics by using either virtual tripwires defined along the fence or area masks. Entry-level analytics use simple motion detection while more advanced analytics use sophisticated algorithms that detect and classify the presence of people, vehicles, and objects while rejecting environmental changes, including wind-induced movement, shadows and small animals.

  • Video analytics offer an exciting new set of capabilities that greatly enhance perimeter security at relatively low cost: Supplement fence sensors by providing additional detection capabilities (especially important for low fences, ornamental fences, and walls).
  • Determine the direction of intrusions (ingress or egress).
  • Provide covert detection (no visible equipment on fence).
  • Detect and track people near both sides of the perimeter fences to provide early warning of potential security events before they can occur. This early warning can be used to direct PTZ cameras, so that high-resolution video can be captured of the intruder at the time the alarm (from the fence sensor) is generated.
  • Use anti-loitering analytics to detect persons "camped out" near the perimeter.
  • Auto-track intruders with a PTZ camera after an alarm is generated (assists in assessment, response, and evidence collection).

A New Approach to Sensor Fusion: The Best of Both Worlds
Both fence-mounted sensors and video analytics are highly developed and mature technologies, but solutions that can further enhance public safety (and offer the potential to reduce operating and maintenance costs) warrant attention.

The concept of sensor fusion technology is not new. The basic premise of combining multiple sensors together to benefit from their strengths while eliminating their weaknesses has been discussed for many years. Historically, this meant a Boolean logic integration between two systems (typically a fence sensor and people tracking video analytics, or a fence sensor and buried sensor installed in parallel).

This approach certainly can work to reduce nuisance alarms caused by well-defined, predicted events.
A better approach is to introduce intelligence into the sensor fusion system by synthesizing low-level data from the separate systems to generate actionable information. More than a simple Boolean logic integration, true sensor fusion analyzes real-time data alongside historical, locational, environmental, and classification data before generating an alarm.

When signal response data is synthesized between sensors from fence video analytic systems, nuisance alarms generated by wind or debris as well as non-threat human activity are virtually eliminated while maintaining the system’s high probability of detection.

True sensor fusion has the following benefits:

  • A lowest possible nuisance alarm rate leads to greater system confidence and better response times.
  • Improved probability of detection (Pd), as the individual sensors can use higher sensitivity settings and announce disturbance events faster.
  • Simplified integration, as the alarm output arrives from a single source (sensor fusion engine).

While advances in perimeter intrusion detection and video analytic technologies will continue to offer exciting new capabilities, nuisance alarms will unfortunately remain an issue. Sensor fusion offers the means to defeat nuisance alarms while maintaining the highest probability of detection.

To take advantage of sensor fusion, electrical providers will need to work with security vendors that have the in-house capability to intelligently synthesis low-level multi-sensor data in order to generate actionable results. The resulting increase in system confidence enables security operators to focus on what’s important, namely a quick and efficient response to real security threats.

This article originally appeared in the March 2022 issue of Security Today.

Featured

  • New Report Reveals Top Trends Transforming Access Controller Technology

    Mercury Security, a provider in access control hardware and open platform solutions, has published its Trends in Access Controllers Report, based on a survey of over 450 security professionals across North America and Europe. The findings highlight the controller’s vital role in a physical access control system (PACS), where the device not only enforces access policies but also connects with readers to verify user credentials—ranging from ID badges to biometrics and mobile identities. With 72% of respondents identifying the controller as a critical or important factor in PACS design, the report underscores how the choice of controller platform has become a strategic decision for today’s security leaders. Read Now

  • Overwhelming Majority of CISOs Anticipate Surge in Cyber Attacks Over the Next Three Years

    An overwhelming 98% of chief information security officers (CISOs) expect a surge in cyber attacks over the next three years as organizations face an increasingly complex and artificial intelligence (AI)-driven digital threat landscape. This is according to new research conducted among 300 CISOs, chief information officers (CIOs), and senior IT professionals by CSC1, the leading provider of enterprise-class domain and domain name system (DNS) security. Read Now

  • ASIS International Introduces New ANSI-Approved Investigations Standard

    • Guard Services
  • Cloud Security Alliance Brings AI-Assisted Auditing to Cloud Computing

    The Cloud Security Alliance (CSA), the world’s leading organization dedicated to defining standards, certifications, and best practices to help ensure a secure cloud computing environment, today introduced an innovative addition to its suite of Security, Trust, Assurance and Risk (STAR) Registry assessments with the launch of Valid-AI-ted, an AI-powered, automated validation system. The new tool provides an automated quality check of assurance information of STAR Level 1 self-assessments using state-of-the-art LLM technology. Read Now

  • Report: Nearly 1 in 5 Healthcare Leaders Say Cyberattacks Have Impacted Patient Care

    Omega Systems, a provider of managed IT and security services, today released new research that reveals the growing impact of cybersecurity challenges on leading healthcare organizations and patient safety. According to the 2025 Healthcare IT Landscape Report, 19% of healthcare leaders say a cyberattack has already disrupted patient care, and more than half (52%) believe a fatal cyber-related incident is inevitable within the next five years. Read Now

New Products

  • Mobile Safe Shield

    Mobile Safe Shield

    SafeWood Designs, Inc., a manufacturer of patented bullet resistant products, is excited to announce the launch of the Mobile Safe Shield. The Mobile Safe Shield is a moveable bullet resistant shield that provides protection in the event of an assailant and supplies cover in the event of an active shooter. With a heavy-duty steel frame, quality castor wheels, and bullet resistant core, the Mobile Safe Shield is a perfect addition to any guard station, security desks, courthouses, police stations, schools, office spaces and more. The Mobile Safe Shield is incredibly customizable. Bullet resistant materials are available in UL 752 Levels 1 through 8 and include glass, white board, tack board, veneer, and plastic laminate. Flexibility in bullet resistant materials allows for the Mobile Safe Shield to blend more with current interior décor for a seamless design aesthetic. Optional custom paint colors are also available for the steel frame.

  • ResponderLink

    ResponderLink

    Shooter Detection Systems (SDS), an Alarm.com company and a global leader in gunshot detection solutions, has introduced ResponderLink, a groundbreaking new 911 notification service for gunshot events. ResponderLink completes the circle from detection to 911 notification to first responder awareness, giving law enforcement enhanced situational intelligence they urgently need to save lives. Integrating SDS’s proven gunshot detection system with Noonlight’s SendPolice platform, ResponderLink is the first solution to automatically deliver real-time gunshot detection data to 911 call centers and first responders. When shots are detected, the 911 dispatching center, also known as the Public Safety Answering Point or PSAP, is contacted based on the gunfire location, enabling faster initiation of life-saving emergency protocols.

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.