Report: Reliability, Training, Vendor Support Driving Factors To Use IP-Based Security

Reliability is the most important factor driving the decision to use IP-based security technology in Europe according to a new report from IMS Research.

While the North American study also identified reliability as an important factor driving the purchase decision, the reliability of the product was seen as less of a concern than in Europe, with training and vendor support considered more important.

Based on a wide-ranging survey of European integrators and installers of IP-based security products, it was found that customer requirements and the ability to future proof installations were also important considerations in the decision to go IP.

The main concern limiting European integrators’ and installers’ use of IP-based security products was the availability of network bandwidth. Reliability was again highlighted as an important consideration with customer misconceptions and the availability of IP products each receiving a high impact rating from one in four survey respondents.

According to report author and IMS Research analyst, Niall Jenkins, “The survey responses were taken from integrators and installers who already use IP-based security products so they had a good feel for the issues and concerns driving the purchasing decisions. It is interesting to note that reliability was identified as both a concern and a key feature driving the decision to purchase. It is clear that integrators and installers place a high value on the reliability of IP-based security products.”

IMS Research’s report, “IP Trends in Security: A Survey of Systems Integrators and Installers -- 2009 Edition”, is published in two regional volumes, Europe and North America.

Featured

New Products

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings.

  • Camden CV-7600 High Security Card Readers

    Camden CV-7600 High Security Card Readers

    Camden Door Controls has relaunched its CV-7600 card readers in response to growing market demand for a more secure alternative to standard proximity credentials that can be easily cloned. CV-7600 readers support MIFARE DESFire EV1 & EV2 encryption technology credentials, making them virtually clone-proof and highly secure.

  • A8V MIND

    A8V MIND

    Hexagon’s Geosystems presents a portable version of its Accur8vision detection system. A rugged all-in-one solution, the A8V MIND (Mobile Intrusion Detection) is designed to provide flexible protection of critical outdoor infrastructure and objects. Hexagon’s Accur8vision is a volumetric detection system that employs LiDAR technology to safeguard entire areas. Whenever it detects movement in a specified zone, it automatically differentiates a threat from a nonthreat, and immediately notifies security staff if necessary. Person detection is carried out within a radius of 80 meters from this device. Connected remotely via a portable computer device, it enables remote surveillance and does not depend on security staff patrolling the area.