A Long-term Relationship

Retirement village updates manual system with future-proof solution

When a Pennsylvania retirement village and nursing home asked Sentinel Service to take over servicing of its various fire alarm systems, John Menter saw an opportunity to offer a better long-term solution.

The existing layout was comprised of seven individual systems in seven buildings of various ages and manufacturers. Each of the systems reported back to a front desk via outputs tied to inputs on the existing nurse call system. In an alarm event, a guard would be dispatched to investigate. Each system also individually dialed out to a central station, and the property was paying for seven monitoring accounts and 14 phone lines. The most frustrating aspect of this layout was the requirement for security personnel to run to the building in alarm, locate the initiating device and direct the firefighters, if needed, or cancel the alarm. Six other buildings needed new installations due to a change in their use to assisted living from apartment living. The owners had to decide whether to keep installing individual systems with limited reporting capabilities and separate dialers or to make a wholesale change to a campus- wide model. The 13 separate systems meant 13 accounts and 26 phone lines, and the recurring expenses just for monitoring would cost $1,500 a month.

A Networked Solution

To Sentinel Service and VES Fire Detection Systems, the obvious answer was to network the campus fire alarm systems and provide a better solution at a much lower recurring cost. By networking the campus and upgrading all of the existing installations to one platform, a much simpler service agreement would be possible, and a new service, test and inspection plan would be simpler and more cost-effective to implement.

"In the end, the customer would have one integrated system to manage and many added features and benefits," Menter said.

Over a 12-month period, all of the existing systems were retrofitted to VES eLAN systems, while a campus-wide fiber-optic backbone was put in place. Fiber was chosen because outdoor copper wire runs would have been susceptible to lightning strikes and some of the distances were too long. Additionally, the fiber installation would support future campus Internet access and digital media, because several spare fiber strands were installed to each building.

Once all of the existing systems were replaced with new equipment, they were networked together via a Class A fiber network and the panel in the administration building was promoted to the media gateway panel. This would allow every panel in the network to report events down to the subpoint level to the media gateway. The immediate benefit was the capability of reporting to the central station through one dialer. This also allowed interfacing to the campus LAN via Ethernet for virtual panel viewing of the fire network from anywhere on site via Internet Explorer.

As new systems on campus are installed, they are given nodes and seamlessly integrated into the larger network. Then a new PC graphical guide system is connected to another panel on the network, allowing both graphical representations of alarm locations and complete reporting and control from the 24-hour manned front security desk. Networking also offers programming advantages. Losing a system's programming is now a thing of the past. All of the system's programming can remain on a secure server with automatic backup.

"System programming can be viewed and revised by multiple authorized users who have Internet access from anywhere, anytime," Menter said.

Fast, Appropriate Response

With the new system in place, the security personnel are able to instantly see exactly what caused the alarm to trigger. Every apartment and patient room's smoke detector could now be individually identified and treated as a supervisory alarm with staff response for verification. Common area alarms could be dispatched with greater speed and specificity than before, pointing firefighters to an exact location.

Another benefit of the new system is that every point in the system—more than 1,500—can be tagged at the central station with hazardous substances, so firefighters know if an area in alarm contains chlorine, propane, oxygen, paint solvents or other listed chemical hazards.

With this simultaneous action of the on-site security personnel and the central station dispatching the fire department with detailed location information, the fastest and most appropriate response can be provided for residents and staff.

Saving Time and Money

Sentinel Service also is now able to perform required inspections and testing of the networked system with the help of an integrated, Web-based software package from VES called eSP. The entire process is automated, from placing the account in test mode to receiving all of the correct test signals and having a readily available record for downloading or printing as needed.

"You are on the job site for the day of inspection, and a fire marshal or inspector shows up to test the system." Menter said. "They test devices, and the system passes. The inspector then offers you a temporary certificate of occupancy until you can give him the printed test results reports.

"With eSP, the technician working with the inspector can call up the reports and hand the inspector the printed report on the spot. If the fire marshal asks for changes, the technician can make the requested changes to the system from any Internet-enabled PC, and the fire marshal or inspector can be handed an updated report while still on the job site. That keeps the inspector to just one visit."

Remote programming saves money. Usually a company needs the most senior programmer at the site on the day of start up, which is expensive. End users often configure the system when parts are ordered and loaded into the system ahead of time. eSP allows end users to signal reports by event in near real time.

"The system installation for this retirement village will be completed this fall, and the customer is very happy with the whole fire system," Menter said.

Featured

  • Ransomware Attacks Rise for the First Time in Six Months

    Ransomware attacks have risen for the first time in six months, increasing by 28% month-on-month to 421 attacks. While overall attack volume remained below 500, the uptick may signal a renewed escalation heading into the year’s most active period for cyber criminals. Read Now

  • Report: 47 Percent of Security Service Providers Are Not Yet Using AI or Automation Tools

    Trackforce, a provider of security workforce management platforms, today announced the launch of its 2025 Physical Security Operations Benchmark Report, an industry-first study that benchmarks both private security service providers and corporate security teams side by side. Based on a survey of over 300 security professionals across the globe, the report provides a comprehensive look at the state of physical security operations. Read Now

    • Guard Services
  • Identity Governance at the Crossroads of Complexity and Scale

    Modern enterprises are grappling with an increasing number of identities, both human and machine, across an ever-growing number of systems. They must also deal with increased operational demands, including faster onboarding, more scalable models, and tighter security enforcement. Navigating these ever-growing challenges with speed and accuracy requires a new approach to identity governance that is built for the future enterprise. Read Now

  • Eagle Eye Networks Launches AI Camera Gun Detection

    Eagle Eye Networks, a provider of cloud video surveillance, recently introduced Eagle Eye Gun Detection, a new layer of protection for schools and businesses that works with existing security cameras and infrastructure. Eagle Eye Networks is the first to build gun detection into its platform. Read Now

  • Report: AI is Supercharging Old-School Cybercriminal Tactics

    AI isn’t just transforming how we work. It’s reshaping how cybercriminals attack, with threat actors exploiting AI to mass produce malicious code loaders, steal browser credentials and accelerate cloud attacks, according to a new report from Elastic. Read Now

New Products

  • Luma x20

    Luma x20

    Snap One has announced its popular Luma x20 family of surveillance products now offers even greater security and privacy for home and business owners across the globe by giving them full control over integrators’ system access to view live and recorded video. According to Snap One Product Manager Derek Webb, the new “customer handoff” feature provides enhanced user control after initial installation, allowing the owners to have total privacy while also making it easy to reinstate integrator access when maintenance or assistance is required. This new feature is now available to all Luma x20 users globally. “The Luma x20 family of surveillance solutions provides excellent image and audio capture, and with the new customer handoff feature, it now offers absolute privacy for camera feeds and recordings,” Webb said. “With notifications and integrator access controlled through the powerful OvrC remote system management platform, it’s easy for integrators to give their clients full control of their footage and then to get temporary access from the client for any troubleshooting needs.”

  • EasyGate SPT and SPD

    EasyGate SPT SPD

    Security solutions do not have to be ordinary, let alone unattractive. Having renewed their best-selling speed gates, Cominfo has once again demonstrated their Art of Security philosophy in practice — and confirmed their position as an industry-leading manufacturers of premium speed gates and turnstiles.

  • ResponderLink

    ResponderLink

    Shooter Detection Systems (SDS), an Alarm.com company and a global leader in gunshot detection solutions, has introduced ResponderLink, a groundbreaking new 911 notification service for gunshot events. ResponderLink completes the circle from detection to 911 notification to first responder awareness, giving law enforcement enhanced situational intelligence they urgently need to save lives. Integrating SDS’s proven gunshot detection system with Noonlight’s SendPolice platform, ResponderLink is the first solution to automatically deliver real-time gunshot detection data to 911 call centers and first responders. When shots are detected, the 911 dispatching center, also known as the Public Safety Answering Point or PSAP, is contacted based on the gunfire location, enabling faster initiation of life-saving emergency protocols.