Study Examines Wireless Network Security At RSA

Motorola AirDefense performed wireless security monitoring at the RSA 2010 conference. Leveraging its Wireless Intrusion Prevention System platform and wireless security expertise, Motorola AirDefense collected and analyzed the security of the wireless networks present at the show.

The monitoring was conducted from Day 1 through Day 2 of the conference (March 2-3.) The following is a summary of the findings from the two days. No attempts were made to interrupt or decrypt traffic at the show.

In terms of the infrastructure, 293 Access Points were identified, while an alarming number of Ad-hoc networks (315) were also discovered.

Ad-hoc networking is a mode of operation that allows two stations to communicate directly with each other, without the use of an access point. This could allow an attacker to impersonate a common SSID and potentially gain connectivity to the wireless station. 116 wireless clients were found to be associated to these ad-hoc networks using common SSID’s (Service Set Identifiers) such as “Free Public WiFi,” “Free Internet Access”, “UCSB wireless web”, “Hotel WIFI”, and “lounge”.

This year, a higher average number of access points (86 percent) were found to be using encryption.

This is an improvement over last year’s show where a significant number of conference access points were found to be open with no encryption.

The majority (63 percent) of the networks using encryption were found to be using encryption types known to be vulnerable to attack. WEP has been cracked for years, and TKIP is becoming increasingly vulnerable due to ongoing proof of concept research over the last 2 years. The recommended encryption is AES/CCMP.

The survey also revealed that a good percentage of the wireless networks were using WPA-PSK (pre-shared key) authentication. WPA-PSK is known to be vulnerable to dictionary attacks.

Use of 802.11n enabled access points still appears to be low, but 802.11a appears to be more common this year, perhaps due to wider availability, and is advantageous for people looking to use a less congested spectrum (5GHz).

More than half of the 2,444 wireless clients were found to be probing for multiple Service Set Identifiers (SSIDs), or the name of the wireless LAN. 

This makes these stations could be vulnerable to evil twin, hotspotter, and MITM (Man in the Middle) attacks). These included laptops, PDAs, and phones with Wi-Fi support. In fact, 1034 of the devices were Apple and 206 were RIM devices.

For those devices using Microsoft Windows, it’s recommended that administrators push out policies to desktop/laptops that disable Ad-Hoc support and disable “Automatically connect to non-preferred networks.”

Similar settings can be found in other operating systems.

On the open networks, web-based email conversations were discovered, amongst other infrastructure data. Many web-based email sites provide for a secure login, but once logged in the email application is clear text. Numerous web-based emails from hotmail, gmail, and Yahoo! were discovered. These vulnerabilities expose web applications, web-based email, and critical infrastructure devices. Encryption should be used whenever possible.

Identity theft by Media Access Control (MAC) spoofing was observed from some wireless clients. This can sometimes be an indication of malicious users impersonating a legitimate access point or station with the goal of performing Man in the Middle (MITM) attacks or bypassing access point security mechanisms. This was evidenced by the number of Ad-Hoc networks and Soft APs discovered at the show.

One of the more recent wireless attack vectors was also discovered.  SSID SQL Injection attacks were identified coming from four different sources at the show. By injecting this into the SSID portion of a frame, one can potentially exploit vulnerable access points. This can then allow a backdoor into the access point and allow the attacker to change the access point configuration, thus allowing them open access to the network.

A variety of wired traffic was found to be leaking from the wireless networks as well, including: NetBIOS, STP, IPX, and IGMP. The unencrypted routing protocols reveal the inner workings of the network and are visible to anyone sniffing the traffic, also known as a form of Extrusion.

This is a clear indication that firewall or filtering mechanisms are inappropriately configured and allowing undesirable traffic to leak from the wired networks. This information could be used by a hacker to enumerate the wired network and read information clear-text. Numerous Windows system names and usernames were enumerated during the analysis. All of this traffic should be properly blocked by a firewall by blocking not only incoming traffic (wireless to wired), but also outgoing traffic (wired to wireless).

Motorola AirDefense’s wireless security survey at the RSA 2010 Conference revealed that common vulnerabilities continue to exist within wireless infrastructures. Clearly the best approach to these ongoing problems involves continued user awareness, leveraging stronger encryption and authentication options available in access points, improving the security posture in layers of defense such as firewalls, and a wireless intrusion prevention system to detect and block intrusion attempts.

 

Featured

  • Gaining a Competitive Edge

    Ask most companies about their future technology plans and the answers will most likely include AI. Then ask how they plan to deploy it, and that is where the responses may start to vary. Every company has unique surveillance requirements that are based on market focus, scale, scope, risk tolerance, geographic area and, of course, budget. Those factors all play a role in deciding how to configure a surveillance system, and how to effectively implement technologies like AI. Read Now

  • 6 Ways Security Awareness Training Empowers Human Risk Management

    Organizations are realizing that their greatest vulnerability often comes from within – their own people. Human error remains a significant factor in cybersecurity breaches, making it imperative for organizations to address human risk effectively. As a result, security awareness training (SAT) has emerged as a cornerstone in this endeavor because it offers a multifaceted approach to managing human risk. Read Now

  • The Stage is Set

    The security industry spans the entire globe, with manufacturers, developers and suppliers on every continent (well, almost—sorry, Antarctica). That means when regulations pop up in one area, they often have a ripple effect that impacts the entire supply chain. Recent data privacy regulations like GDPR in Europe and CPRA in California made waves when they first went into effect, forcing businesses to change the way they approach data collection and storage to continue operating in those markets. Even highly specific regulations like the U.S.’s National Defense Authorization Act (NDAA) can have international reverberations – and this growing volume of legislation has continued to affect global supply chains in a variety of different ways. Read Now

  • Access Control Technology

    As we move swiftly toward the end of 2024, the security industry is looking at the trends in play, what might be on the horizon, and how they will impact business opportunities and projections. Read Now

Featured Cybersecurity

Webinars

New Products

  • FEP GameChanger

    FEP GameChanger

    Paige Datacom Solutions Introduces Important and Innovative Cabling Products GameChanger Cable, a proven and patented solution that significantly exceeds the reach of traditional category cable will now have a FEP/FEP construction. 3

  • AC Nio

    AC Nio

    Aiphone, a leading international manufacturer of intercom, access control, and emergency communication products, has introduced the AC Nio, its access control management software, an important addition to its new line of access control solutions. 3

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings. 3