The Network is Alive

Albert Einstein Healthcare Network finds seamless and secure re-badging

For more than 140 years, The Albert Einstein Healthcare Network has provided impeccable medical care to the greater Philadelphia area and has earned a reputation for quality, excellence and leadership in the healthcare field.

To better serve the communities of greater Philadelphia, the network split from Jefferson Health System, Philadelphia’s largest healthcare system, to pursue its own strategic direction.

As a result, Albert Einstein Medical Center changed its name to Albert Einstein Healthcare Network. Senior management implemented a rebranding strategy that included a new corporate identity and mission as well as a new logo.

Leading the Charge
The first major challenge for AEHN security, led by Russell Jones, the network director for protective services, was replacing the employees’, doctors’, volunteers’ and other medical staff’s badges with ID cards featuring the network’s new logo.

And while developing a re-badging production strategy, Jones decided to leverage the project to upgrade AEHN’s entire access control system as well.

This was no small task. With four hospitals, seven campuses and approximately 50 off-site primary care physician and surgical center locations, the medical center and its network host 1,200 beds, 6,000 employees, 1,200 staff and voluntary physicians, 10,000 visitors a day and more than 100,000 emergency room patients a year.

AEHN required new readers to replace its 300 existing Wiegand swipe card readers. In addition, it needed to produce 7,000 new badges securely and distribute them to ID cardholders efficiently, with minimal disruption to the normal flow of business.

“The Protective Services Department is a lean group of people responsible for all aspects of security at Albert Einstein,” Jones said. “With our small team, it was imperative to identify a cost-effective method to re-badge the employees, volunteers and other personnel that wouldn’t dominate our time for weeks on end.”

Since AEHN has multiple campuses spread over a wide geographical distance, installation of the new readers and re-badging needed to take place in phases.

“We needed a solution that would work with our old Wiegand swipe card technology and allow us to migrate in phases to a more technologically advanced access control solution,” Jones said.

Another important requirement for AEHN was to integrate its KRONOS payroll system, which tracks time and attendance, into the new badges. Integrating payroll into the system added a layer of complexity to the card technology that was personally important to employees and the overall healthcare system, and allowed no margin for error.

Getting the Job Done
With his challenges outlined, Jones selected Siemens Industry Inc., a global security systems integrator, to be the technology integrator on the project. Siemens chose HID Global’s iCLASS technology readers and smart cards and HID Identity on Demand Services to securely produce the thousands of new ID badges.

HID Global provided AEHN’s Wiegand system, so it was a natural progression to upgrade the access control system and produce badges using HID Global’s solutions, as Jones and his department already trusted the company’s products and services.

“Siemens, HID and I put a tremendous amount of effort into planning and implementing the best solution for Albert Einstein Healthcare Network,” Jones said. “The reader and badge upgrade could not have gone as well as it did without the partnership of Siemens and HID Global. Our partnership was pivotal in the success of this large and complicated project.”

The healthcare network’s facilities have higher levels of security with iCLASS contactless smart cards than they would with traditional access-control technologies.

They also benefit from a platform that not only incorporates the payroll system but can also easily add other applications, such as single sign-on and cashless vending.

As the new technology was to be installed in phases, old and new card readers were going to exist in the facilities at the same time. To ensure a seamless transition for employees, HID Global offered dual-technology iCLASS cards that worked on both systems.

At the start of the project, Jones had considered the option of producing the ID badges in-house with rented equipment and temporary staff. But in addition to the cost and time that would require from his protective services team to manage and supervise the project, Jones was concerned about the possible waste due to mistakes made in badge creation. He wanted a turnkey solution to produce the cards quickly with the least amount of handholding.

Based on Siemens and HID Global’s recommendations, AEHN leveraged HID’s expertise by choosing to use HID Identity on Demand Services rather than producing the badges in-house.

“A major concern was to get the KRONOS payroll system tied into the cards,” Jones said. “We chose HID Global IoD because it was extremely reliable and had a quick turnaround time.”

HID Global’s IoD services securely produced personalized credentials quickly, efficiently and within budget. IoD worked with AEHN every step of the way, ensuring each card detail was perfect so that they could securely transfer sensitive information from their database. To guarantee that AEHN’s KRONOS payroll system worked accurately with these cards, IoD printed 50 cards that were then tested over two payroll cycles. The cards performed perfectly each time and proved their compatibility with the KRONOS payroll system.

“Allowing us to do a test run of the new ID cards with our payroll system gave us the peace of mind we are accustomed to with HID Global and Siemens,” Jones said.

Once they confirmed the payroll and ID cards were fully integrated, AEHN provided a database of employees and their photos so the badges could be printed and encoded off-site at IoD’s card production facility. Within four weeks, the healthcare network had 7,000 newly branded badges incorporating the new technology.

“Using HID Global’s Identity on Demand services for the re-badging aspect of this project was a significant benefit because it required minimal involvement from me and my team, allowing us to focus on other high-priority issues,” Jones said.

As the Wiegand swipe readers were replaced in phases with iCLASS contactless card readers, the dual-technology cards are compatible across multiple facilities. The remaining 3,000 of the 10,000 printed cards only featured contactless technology because eventually all the Wiegand equipment will be replaced with the new iCLASS readers.

Results and the Future
Four weeks after initiating the project with HID Global’s IoD group, AEHN had 7,000 personalized badges that announced its new brand, increased security with the latest technology and seamlessly integrated with its payroll system. The entire project was completed on time and within budget.

Since adoption of the new smartcard badges, departments have integrated other functions including: single sign-on to computers, enhancing the security of AEHN information throughout the organization, and cashless vending, integrating cafeteria and vending systems to work with the payroll system.

Future plans for the multi-application platform include tracking employees’ mandatory vaccinations and adding physicians’ credentials for visiting doctors in case of a disaster. Down the road, Einstein is hoping to integrate the access control cards with medical records and patient information as well.

In the near future, AEHN is incorporating a fifth hospital and campus in Montgomery, Pa., to the security network that HID Global and Siemens provided.

A side benefit to the project is a major savings in card replacements. With the legacy Wiegand swipe technology, AEHN replaced approximately 1,000 employee ID cards every year due to wear and tear. Now with the HID Global iCLASS contactless cards, produced by Identity on Demand services, fewer than 100 are replaced yearly.

“HID is a gold-plated company when it comes to access control cards and employee badges,” Jones said. “We wanted to be confident in our investment, so we went with genuine HID.”

This article originally appeared in the January 2011 issue of Security Today.

About the Author

Eric Widlitz is Vice President of North America Sales for Vanderbilt.

Featured

Featured Cybersecurity

Webinars

New Products

  • Automatic Systems V07

    Automatic Systems V07

    Automatic Systems, an industry-leading manufacturer of pedestrian and vehicle secure entrance control access systems, is pleased to announce the release of its groundbreaking V07 software. The V07 software update is designed specifically to address cybersecurity concerns and will ensure the integrity and confidentiality of Automatic Systems applications. With the new V07 software, updates will be delivered by means of an encrypted file. 3

  • Mobile Safe Shield

    Mobile Safe Shield

    SafeWood Designs, Inc., a manufacturer of patented bullet resistant products, is excited to announce the launch of the Mobile Safe Shield. The Mobile Safe Shield is a moveable bullet resistant shield that provides protection in the event of an assailant and supplies cover in the event of an active shooter. With a heavy-duty steel frame, quality castor wheels, and bullet resistant core, the Mobile Safe Shield is a perfect addition to any guard station, security desks, courthouses, police stations, schools, office spaces and more. The Mobile Safe Shield is incredibly customizable. Bullet resistant materials are available in UL 752 Levels 1 through 8 and include glass, white board, tack board, veneer, and plastic laminate. Flexibility in bullet resistant materials allows for the Mobile Safe Shield to blend more with current interior décor for a seamless design aesthetic. Optional custom paint colors are also available for the steel frame. 3

  • ResponderLink

    ResponderLink

    Shooter Detection Systems (SDS), an Alarm.com company and a global leader in gunshot detection solutions, has introduced ResponderLink, a groundbreaking new 911 notification service for gunshot events. ResponderLink completes the circle from detection to 911 notification to first responder awareness, giving law enforcement enhanced situational intelligence they urgently need to save lives. Integrating SDS’s proven gunshot detection system with Noonlight’s SendPolice platform, ResponderLink is the first solution to automatically deliver real-time gunshot detection data to 911 call centers and first responders. When shots are detected, the 911 dispatching center, also known as the Public Safety Answering Point or PSAP, is contacted based on the gunfire location, enabling faster initiation of life-saving emergency protocols. 3