NIST Report Evaluates Performance Of Iris Recognition Software

Identifying people by acquiring pictures of their eyes is becoming easier, according to a new report from the National Institute of Standards and Technology (NIST).

NIST researchers evaluated the performance of iris recognition software from 11 different organizations and found that some techniques produced very rapid results -- though this speed was often at the cost of accuracy.

Iris recognition, a form of biometric identification based on noncontact imaging of the complex texture in an individual's iris, has been purported to be both fast and accurate -- claims that had not been validated until now. The Iris Exchange (IREX) III report is the first public and independent comparison of commercially available algorithms that use iris recognition for the challenging task of finding an individual match within a large database of potential identities. Previous published studies only used single algorithms or considered "one-to-one" verification, in which an individual claims an identity and the software then attempts to confirm whether the claim matches a specific record.

NIST evaluated 92 different iris recognition algorithms from nine private companies and two university labs, all of which submitted software to an open competition held by NIST. The task was to identify individuals from a database of eye images taken from more than 2.2 million people.

"If, for example, you are trying to pick out a fugitive who is trying to cross a national border, you need to know your software can identify that person from among millions of records," said Patrick Grother, a scientist in NIST's Information Access Division. "This ability to pick out a 'needle in a haystack' quickly and accurately is crucial, and we found some algorithms can search a haystack thousands of times larger than others. This is important because often there is no corresponding record, no needle to be found."

Among the results: Accuracy varied substantially across the algorithms the NIST team tested. Success rates ranged between 90 and 99 percent among the algorithms, meaning that no software was perfect, and some produced as many as 10 times more errors than others. Also, the tests found that while some algorithms would be fast enough to run through a dataset equivalent to the size of the entire U.S. population in less than 10 seconds using a typical computer, there could be limitations to their accuracy. A related NIST report showed that accuracy could be improved if operators control image collection more tightly during acquisition, thereby obtaining better quality iris images.

"When combined with the feedback that this study provides to the industry and the use of the iris in combination with other biometrics, the findings will push accuracy toward 100 percent," Grother said. Grother adds that the new findings should be useful to policy makers, who are increasingly incorporating iris recognition in official systems in places as far-flung as India, Mexico and Indonesia, as well as the United States and Canada.

Featured

Featured Cybersecurity

Webinars

New Products

  • Camden CV-7600 High Security Card Readers

    Camden CV-7600 High Security Card Readers

    Camden Door Controls has relaunched its CV-7600 card readers in response to growing market demand for a more secure alternative to standard proximity credentials that can be easily cloned. CV-7600 readers support MIFARE DESFire EV1 & EV2 encryption technology credentials, making them virtually clone-proof and highly secure. 3

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings. 3

  • A8V MIND

    A8V MIND

    Hexagon’s Geosystems presents a portable version of its Accur8vision detection system. A rugged all-in-one solution, the A8V MIND (Mobile Intrusion Detection) is designed to provide flexible protection of critical outdoor infrastructure and objects. Hexagon’s Accur8vision is a volumetric detection system that employs LiDAR technology to safeguard entire areas. Whenever it detects movement in a specified zone, it automatically differentiates a threat from a nonthreat, and immediately notifies security staff if necessary. Person detection is carried out within a radius of 80 meters from this device. Connected remotely via a portable computer device, it enables remote surveillance and does not depend on security staff patrolling the area. 3